Maintaining Filters for Healthier Air in All Seasons

Maintaining Filters for Healthier Air in All Seasons

Understanding the Basics of HVAC Systems and Their Seasonal Needs

As the seasons transition, so too do the environmental conditions that impact indoor air quality. Understanding these seasonal changes is crucial for maintaining air filters, which play a pivotal role in ensuring healthier air throughout the year. Outdoor compressor units should be shielded from debris and weather exposure Mobile Home Hvac Service gas. This essay delves into how varying seasons affect air filters and provides insights on maintaining them for optimal performance.


Spring ushers in a sense of renewal, but it also brings an abundance of pollen and allergens. As plants bloom, the concentration of airborne particles increases significantly. Air filters become vital during this period as they capture pollen and prevent it from circulating indoors. Homeowners should ensure their filters are clean or replaced at the start of spring to handle the increased load of allergens effectively.


Summer introduces its own challenges with warmer temperatures and higher humidity levels. These conditions can facilitate mold growth, especially in damp areas like basements or near HVAC units. Filters need to be checked regularly to prevent mold spores from spreading through ventilation systems. It is advisable to use high-efficiency particulate air (HEPA) filters during summer months as they are particularly effective at trapping smaller particles such as mold spores.


Autumn signals another shift with falling leaves and decaying plant matter contributing to dust levels. The cooler weather often encourages more time spent indoors, increasing reliance on heating systems that circulate air throughout homes and buildings. During this season, it's essential to inspect and replace filters frequently to tackle both dust accumulation and increased indoor activity.


Winter poses a unique set of challenges due to closed windows and doors aimed at conserving heat, leading to reduced ventilation. Indoor pollutants such as pet dander, cooking emissions, and smoke from fireplaces can accumulate quickly. To maintain clean indoor air during winter months, high-quality filters should be used and changed more often than usual due to restricted airflow that exacerbates pollutant build-up.


In conclusion, each season presents distinct environmental factors that affect indoor air quality through different mechanisms impacting air filter performance. By being proactive about changing or cleaning filters according to seasonal demands-whether it's combating spring allergens or winter's confined spaces-individuals can ensure healthier living environments year-round. Regular maintenance not only prolongs the life of HVAC systems but also fosters better respiratory health by minimizing exposure to harmful particulates present in unfiltered indoor air.

Maintaining clean and efficient HVAC filters is crucial for ensuring healthier indoor air quality throughout the year. Different filters come with varying capabilities, making them suitable for different seasons and conditions. Understanding these options can help homeowners make informed decisions that enhance both comfort and health.


HVAC filters are primarily categorized by their materials and efficiency levels. The most common types include fiberglass, pleated, washable, and HEPA filters. Each type has its own set of advantages and disadvantages, which can influence their effectiveness in different seasonal scenarios.


Fiberglass filters are the most basic option. They are inexpensive and designed to protect the HVAC system from large particles like dust and debris. However, they don't capture smaller pollutants such as pollen or mold spores efficiently. During springtime when pollen counts are high, these filters might not suffice for those with allergies or respiratory issues.


Pleated filters offer a step up in filtration capability. Made from polyester or cotton folds, they increase surface area to trap more particulates than fiberglass filters do. They can be beneficial during fall when leaves decay outside, increasing airborne particulates indoors. Pleated filters balance cost-efficiency and improved air quality without overly restricting airflow.


Washable or reusable filters provide an eco-friendly option as they reduce waste compared to disposable types. While economical in the long term, their efficiency may decline over repeated use unless cleaned meticulously every month. These could be ideal during milder seasons like summer when air pollutants tend to be less pronounced but require regular maintenance to ensure optimal performance.


HEPA (High-Efficiency Particulate Air) filters are renowned for their ability to remove up to 99.97% of airborne particles down to 0.3 microns in size, including bacteria and viruses. These are particularly useful during winter months when homes are sealed tight against cold weather, trapping indoor pollutants inside where inhabitants spend more time breathing recirculated air.


Seasonal changes also bring variations in humidity levels which affect filter performance indirectly by influencing contaminant growth within the system itself-mold being a prime example during humid summers or rainy seasons where moisture infiltrates ductwork more readily.


Ultimately choosing the right filter involves balancing several factors: seasonal needs based on prevalent allergens or pollutants at certain times of year; specific household concerns such as allergies or asthma; cost considerations related both initial purchase price versus replacement frequency; environmental impact regarding disposability versus sustainability options available through reusable products among others considerations unique each home's circumstances preferences priorities alike!


In conclusion maintaining healthier air involves recognizing how each type of HVAC filter performs under varying conditions adapting accordingly ensure optimal safety comfort across all four seasons alike!

Understanding the Role of Proper Insulation in Mobile Home Energy Efficiency

Understanding the Role of Proper Insulation in Mobile Home Energy Efficiency

Understanding the role of proper insulation in mobile home energy efficiency is crucial for homeowners seeking to enhance comfort and reduce energy costs.. Mobile homes, by their nature, often face unique challenges regarding heat retention and loss.

Posted by on 2024-12-23

What New SEER Regulations Mean for Mobile Home HVAC Replacements

What New SEER Regulations Mean for Mobile Home HVAC Replacements

The introduction of new SEER (Seasonal Energy Efficiency Ratio) regulations marks a significant shift in the landscape of heating, ventilation, and air conditioning (HVAC) systems across America.. These regulations aim to increase energy efficiency and reduce environmental impact.

Posted by on 2024-12-23

Seasonal HVAC Maintenance Tips to Keep Your Mobile Home Comfortable Year-Round

Seasonal HVAC Maintenance Tips to Keep Your Mobile Home Comfortable Year-Round

Maintaining a comfortable living environment in your mobile home throughout the year necessitates attention to your HVAC system, particularly through regular professional inspections and tune-ups.. These practices are not just about preventing discomfort during extreme weather; they offer a host of benefits that contribute to the efficiency, safety, and longevity of your home's heating and cooling systems. Firstly, one of the most significant advantages of regular HVAC inspections is improved energy efficiency.

Posted by on 2024-12-23

Summer Strategies: Keeping Your HVAC Running Efficiently in Peak Heat

Maintaining clean and efficient air filters is paramount for ensuring healthier air quality in our homes and workplaces throughout the year. As seasons change, so do the environmental conditions around us, impacting indoor air quality in various ways. Regular filter maintenance not only supports respiratory health but also enhances the performance and longevity of heating, ventilation, and air conditioning (HVAC) systems. By adhering to some best practices for regular filter maintenance, we can create a healthier living environment regardless of the season.


First and foremost, it is essential to establish a consistent schedule for checking and replacing air filters. Most manufacturers recommend inspecting filters every 30 to 60 days; however, this frequency may vary depending on factors such as household size, presence of pets, or specific health needs like allergies. During periods of heavy use-such as summer when cooling systems are running frequently or winter when heating is constant-the need for more frequent checks becomes evident. By establishing a routine inspection schedule that considers these variables, homeowners can prevent issues before they arise.


Understanding the types of filters available is another crucial aspect of effective maintenance. Filters come in various materials and efficiencies, from basic fiberglass options to more advanced pleated or HEPA designs. Selecting the right filter depends on individual needs: those with allergies might benefit from higher-efficiency filters capable of capturing smaller particles like pollen or pet dander. Regardless of type, ensuring that replacement filters match system specifications is vital for maintaining both air quality and HVAC efficiency.


Regular cleaning complements timely replacement as part of a comprehensive maintenance strategy. While disposable filters should be replaced rather than cleaned, reusable filters can often be washed gently with water or mild soap-always following manufacturer instructions to avoid damage. Cleaning helps maintain optimal airflow through the system while reducing strain on motors and fans.


Seasonal changes present unique challenges that warrant special attention during filter maintenance routines. Spring brings an influx of pollen and allergens; thus, using high-efficiency particulate air (HEPA) filters during this time can help mitigate allergy symptoms indoors. Summer's humidity may encourage mold growth in vents if left unchecked-regularly replacing dampened filters reduces this risk significantly. In fall and winter months when homes tend toward being sealed against cold weather drafts, ensuring proper filtration becomes critical due to increased reliance on indoor air circulation.


Beyond direct interaction with the filters themselves lies another layer: cultivating awareness about surrounding environments contributes greatly toward proactive care efforts throughout each season's transitions. For instance: monitoring local pollution levels via apps allows adjustments based on current outdoor conditions affecting indoor spaces indirectly through open windows/doors etcetera providing additional insight into how best practice methodologies align alongside practical implementation strategies aimed squarely at achieving healthier breathable atmospheres within domestic boundaries everywhere!


In conclusion regular filter maintenance stands firmly rooted not only within technical realms concerning mechanical operations but extends outward encompassing broader lifestyle considerations ultimately geared toward promoting holistic well-being among inhabitants occupying shared spaces year-round!

Summer Strategies: Keeping Your HVAC Running Efficiently in Peak Heat

Fall Preparations: Transitioning from Cooling to Heating

In our quest for healthier living environments, the role of air filters often goes unnoticed, yet they are pivotal in maintaining clean indoor air. Regular filter maintenance is essential to ensure that we breathe in fresh and pollutant-free air throughout all seasons. However, many homeowners are unaware of the signs that indicate a need for filter replacement or maintenance. Recognizing these signs can significantly enhance air quality and contribute to overall health.


One of the most evident signs that an air filter requires attention is a noticeable decrease in indoor air quality. When filters become clogged with dust, pollen, and other pollutants, they lose their efficiency in trapping these particles. As a result, you may notice more dust settling on furniture or experience increased allergy symptoms such as sneezing and coughing. These are clear indicators that your filter might be overdue for a change.


Additionally, an increase in energy bills can signal the need for filter maintenance. Clogged filters force HVAC systems to work harder to circulate air throughout your home, resulting in higher energy consumption. If you observe a sudden spike in utility costs without any significant changes in usage patterns, it's wise to inspect your filters as a potential cause.


Another sign is inconsistent temperature regulation within your home. Filters play a crucial role not only in purifying the air but also in ensuring that heating and cooling systems function efficiently. A dirty filter can restrict airflow, leading to uneven temperatures across different rooms. If some areas feel significantly warmer or cooler than others despite adjusting thermostat settings, this inconsistency could point to a compromised filter.


Moreover, unusual noises emanating from your HVAC system can be indicative of filter issues. Rattling or whistling sounds may occur when the system struggles against restricted airflow caused by blocked filters. Paying attention to these auditory clues can prevent further damage and help maintain optimal system performance.


Regular visual inspections can also reveal when it's time for filter replacement or cleaning. A simple glance at your filter can show whether it's laden with dust and debris beyond its capacity to function effectively. Manufacturers typically recommend changing filters every three months; however, households with pets or located near construction sites might require more frequent replacements.


In conclusion, maintaining clean air filters is crucial for ensuring healthy indoor environments year-round. By staying vigilant and recognizing signs such as reduced air quality, rising energy bills, inconsistent temperatures, unusual system noises, and visibly dirty filters, homeowners can proactively address issues before they escalate into larger problems. Emphasizing regular maintenance not only promotes better health but also extends the longevity of HVAC systems while contributing to energy efficiency-a win-win situation for both residents and their homes alike.

Winter Tips: Ensuring Optimal Performance During Cold Months

Maintaining filters is an essential aspect of ensuring healthier air in all seasons, and the benefits of timely filter maintenance extend beyond just improved air quality. They encompass significant health advantages and enhanced energy efficiency, making it a crucial practice for both residential and commercial spaces.


Firstly, one of the most immediate benefits of regular filter maintenance is the improvement in indoor air quality. Filters are designed to trap dust, pollen, pet dander, and other airborne particles that can exacerbate allergies and respiratory issues. Over time, these filters can become clogged with debris, reducing their effectiveness. By regularly cleaning or replacing filters, we ensure that they continue to capture harmful particles efficiently. This not only provides cleaner air but also reduces the likelihood of health problems such as asthma attacks or allergy flare-ups, promoting overall well-being.


In addition to health benefits, timely filter maintenance significantly contributes to energy efficiency. When filters are clogged with dirt and debris, heating and cooling systems have to work harder to circulate air through the space. This increased workload leads to higher energy consumption and consequently higher utility bills. By maintaining clean filters, HVAC systems can operate more smoothly and efficiently, reducing energy usage and saving money in the long run. Furthermore, an efficient system experiences less wear and tear over time, potentially extending its lifespan and minimizing costly repairs or replacements.


Moreover, effective filter maintenance supports environmental sustainability by decreasing energy consumption. As households and businesses strive to reduce their carbon footprint, maintaining efficient HVAC systems becomes a vital component of eco-friendly practices. The reduced demand for electricity not only lowers costs but also lessens the reliance on fossil fuels, contributing positively towards global environmental goals.


Lastly, in climates with distinct seasonal changes-where heating during winter months or cooling during summer months is necessary-timely filter maintenance ensures optimal system performance throughout the year. Whether it's keeping warm during a cold spell or staying cool amidst a heatwave, clean filters help maintain comfortable indoor environments regardless of external weather conditions.


In conclusion, the benefits of timely filter maintenance for health and energy efficiency are multifaceted. Cleaner air promotes better health outcomes by mitigating exposure to allergens and pollutants; meanwhile, enhanced energy efficiency results in financial savings and supports broader environmental efforts. Regularly attending to this often-overlooked task ensures that our living spaces remain healthy havens across all seasons while also being mindful stewards of our planet's resources.

Year-Round Monitoring and Regular Inspections for Longevity

Maintaining HVAC filters is crucial for ensuring healthier air in all seasons, yet it's easy to make mistakes that can compromise indoor air quality. Understanding and avoiding these common pitfalls can help keep your system running efficiently and your home's air clean and healthy.


One of the most frequent mistakes is neglecting to change or clean the filters regularly. HVAC systems work tirelessly year-round, especially during peak heating and cooling seasons. Over time, filters collect dust, pollen, pet dander, and other airborne particles. A dirty filter not only reduces the efficiency of your system but also circulates pollutants back into your home. To avoid this mistake, set a regular schedule for checking and replacing filters-typically every one to three months depending on usage and filter type.


Another common error is choosing the wrong type of filter for your needs. Filters come in various efficiencies measured by their Minimum Efficiency Reporting Value (MERV) rating. While higher MERV ratings indicate better filtration ability, they can also restrict airflow if not compatible with your system. This can lead to increased energy consumption and strain on your HVAC unit. It's essential to consult your system's manual or a professional to determine the appropriate filter for optimal performance without unnecessary load.


Improper installation is another mistake that's often overlooked. Filters need to be installed correctly to function as intended; even slightly misaligned or incorrectly sized filters can allow unfiltered air to bypass them altogether. Always ensure that you follow the arrows on filters indicating airflow direction during installation, and double-check that they fit snugly within their housing.


Many homeowners forget about seasonal changes when maintaining their HVAC systems. Different times of the year bring different challenges-spring may introduce more pollen into homes, while winter might increase dust levels due to closed windows and doors. Adjusting the frequency of filter maintenance according to seasonal demands ensures that you're always breathing cleaner air.


Finally, relying solely on HVAC filters for indoor air quality improvement is a mistake in itself. While they play a significant role in trapping pollutants, integrating additional measures such as regular cleaning of vents and ducts, using air purifiers, or improving natural ventilation can enhance overall air quality significantly.


In conclusion, proper maintenance of HVAC filters requires awareness of these common mistakes: neglecting regular replacement or cleaning schedules; choosing inappropriate filters; incorrect installation; ignoring seasonal changes; and over-relying on them without supplementary measures. By addressing these issues proactively, you ensure healthier indoor environments throughout the year while also prolonging the life of your HVAC system.

Mobile homes with detached single car garages

A mobile home (also known as a house trailer, park home, trailer, or trailer home) is a prefabricated structure, built in a factory on a permanently attached chassis before being transported to site (either by being towed or on a trailer). Used as permanent homes, or for holiday or temporary accommodation, they are often left permanently or semi-permanently in one place, but can be moved, and may be required to move from time to time for legal reasons.

Mobile homes share the same historic origins as travel trailers, but today the two are very different, with travel trailers being used primarily as temporary or vacation homes. Behind the cosmetic work fitted at installation to hide the base, mobile homes have strong trailer frames, axles, wheels, and tow-hitches.

History

[edit]

In the United States, this form of housing goes back to the early years of cars and motorized highway travel.[1] It was derived from the travel trailer (often referred to during the early years as "house trailers" or "trailer coaches"), a small unit with wheels attached permanently, often used for camping or extended travel. The original rationale for this type of housing was its mobility. Units were initially marketed primarily to people whose lifestyle required mobility. However, in the 1950s, the homes began to be marketed primarily as an inexpensive form of housing designed to be set up and left in a location for long periods of time or even permanently installed with a masonry foundation. Previously, units had been eight feet or fewer in width, but in 1956, the 10-foot (3.0 m) wide home ("ten-wide") was introduced, along with the new term "mobile home".[2]

The homes were given a rectangular shape, made from pre-painted aluminum panels, rather than the streamlined shape of travel trailers, which were usually painted after assembly. All of this helped increase the difference between these homes and home/travel trailers. The smaller, "eight-wide" units could be moved simply with a car, but the larger, wider units ("ten-wide", and, later, "twelve-wide") usually required the services of a professional trucking company, and, often, a special moving permit from a state highway department. During the late 1960s and early 1970s, the homes were made even longer and wider, making the mobility of the units more difficult. Nowadays, when a factory-built home is moved to a location, it is usually kept there permanently and the mobility of the units has considerably decreased. In some states, mobile homes have been taxed as personal property if the wheels remain attached, but as real estate if the wheels are removed. Removal of the tongue and axles may also be a requirement for real estate classification.

Manufactured home

[edit]
Example of a modern manufactured home in New Alexandria, Pennsylvania. 28 by 60 feet (8.5 m × 18.3 m)
Manufactured home foundation

Mobile homes built in the United States since June 1976, legally referred to as manufactured homes, are required to meet FHA certification requirements and come with attached metal certification tags. Mobile homes permanently installed on owned land are rarely mortgageable, whereas FHA code manufactured homes are mortgageable through VA, FHA, and Fannie Mae.

Many people who could not afford a traditional site-built home, or did not desire to commit to spending a large sum of money on housing, began to see factory-built homes as a viable alternative for long-term housing needs. The units were often marketed as an alternative to apartment rental. However, the tendency of the units of this era to depreciate rapidly in resale value[citation needed] made using them as collateral for loans much riskier than traditional home loans. Terms were usually limited to less than the thirty-year term typical of the general home-loan market, and interest rates were considerably higher.[citation needed] In that way, mobile home loans resembled motor vehicle loans more than traditional home mortgage loans.

Construction and sizes

[edit]
Exterior wall assemblies being set in place during manufacture

Mobile homes come in two major sizes, single-wides and double-wides. Single-wides are 18 feet (5.5 m) or less in width and 90 feet (27 m) or less in length and can be towed to their site as a single unit. Double-wides are 20 feet (6.1 m) or more wide and are 90 feet (27 m) in length or less and are towed to their site in two separate units, which are then joined. Triple-wides and even homes with four, five, or more units are also built but less frequently.

While site-built homes are rarely moved, single-wide owners often "trade" or sell their home to a dealer in the form of the reduction of the purchase of a new home. These "used" homes are either re-sold to new owners or to park owners who use them as inexpensive rental units. Single-wides are more likely to be traded than double-wides because removing them from the site is easier. In fact, only about 5% of all double-wides will ever be moved.[citation needed]

While an EF1 tornado might cause minor damage to a site-built home, it could do significant damage to a factory-built home, especially an older model or one that is not properly secured. Also, structural components (such as windows) are typically weaker than those in site-built homes.[3] 70 miles per hour (110 km/h) winds can destroy a mobile home in a matter of minutes. Many brands offer optional hurricane straps, which can be used to tie the home to anchors embedded in the ground.

Regulations

[edit]

United States

[edit]
Home struck by tornado

In the United States, mobile homes are regulated by the US Department of Housing and Urban Development (HUD), via the Federal National Manufactured Housing Construction and Safety Standards Act of 1974. This national regulation has allowed many manufacturers to distribute nationwide because they are immune to the jurisdiction of local building authorities.[4] [5]: 1  By contrast, producers of modular homes must abide by state and local building codes. There are, however, wind zones adopted by HUD that home builders must follow. For example, statewide, Florida is at least wind zone 2. South Florida is wind zone 3, the strongest wind zone. After Hurricane Andrew in 1992, new standards were adopted for home construction. The codes for building within these wind zones were significantly amended, which has greatly increased their durability. During the 2004 hurricanes in Florida, these standards were put to the test, with great success. Yet, older models continue to face the exposed risk to high winds because of the attachments applied such as carports, porch and screen room additions. Such areas are exposed to "wind capture" which apply extreme force to the underside of the integrated roof panel systems, ripping the fasteners through the roof pan causing a series of events which destroys the main roof system and the home.

The popularity of the factory-built homes caused complications the legal system was not prepared to handle. Originally, factory-built homes tended to be taxed as vehicles rather than real estate, which resulted in very low property tax rates for their inhabitants. That caused local governments to reclassify them for taxation purposes.

However, even with that change, rapid depreciation often resulted in the home occupants paying far less in property taxes than had been anticipated and budgeted. The ability to move many factory-built homes rapidly into a relatively small area resulted in strains to the infrastructure and governmental services of the affected areas, such as inadequate water pressure and sewage disposal, and highway congestion. That led jurisdictions to begin placing limitations on the size and density of developments.

Early homes, even those that were well-maintained, tended to depreciate over time, much like motor vehicles. That is in contrast to site-built homes which include the land they are built on and tend to appreciate in value. The arrival of mobile homes in an area tended to be regarded with alarm, in part because of the devaluation of the housing potentially spreading to preexisting structures.

This combination of factors has caused most jurisdictions to place zoning regulations on the areas in which factory-built homes are placed, and limitations on the number and density of homes permitted on any given site. Other restrictions, such as minimum size requirements, limitations on exterior colors and finishes, and foundation mandates have also been enacted. There are many jurisdictions that will not allow the placement of any additional factory-built homes. Others have strongly limited or forbidden all single-wide models, which tend to depreciate more rapidly than modern double-wide models.

Apart from all the practical issues described above, there is also the constant discussion about legal fixture and chattels and so the legal status of a trailer is or could be affected by its incorporation to the land or not. This sometimes involves such factors as whether or not the wheels have been removed.

North Carolina

[edit]

The North Carolina Board of Transportation allowed 14-foot-wide homes on the state's roads, but until January 1997, 16-foot-wide homes were not allowed. 41 states allowed 16-foot-wide homes, but they were not sold in North Carolina. Under a trial program approved January 10, 1997, the wider homes could be delivered on specific roads at certain times of day and travel 10 mph below the speed limit, with escort vehicles in front and behind.[6][7] Eventually, all homes had to leave the state on interstate highways.[8]

In December 1997, a study showed that the wider homes could be delivered safely, but some opponents still wanted the program to end.[9] On December 2, 1999, the NC Manufactured Housing Institute asked the state Board of Transportation to expand the program to allow deliveries of 16-foot-wide homes within North Carolina.[8] A month later, the board extended the pilot program by three months but did not vote to allow shipments within the state.[10] In June 2000, the board voted to allow 16-foot-side homes to be shipped to other states on more two-lane roads, and to allow shipments in the state east of US 220. A third escort was required, including a law enforcement officer on two-lane roads.[11]

New York

[edit]

In New York State, the Homes and Community Renewal agency tracks mobile home parks and provides regulations concerning them. For example, the agency requires park owners to provide residents with a $15,000 grant if residents are forced to move when the land is transferred to a new owner. Residents are also granted the right of first refusal for a sale of the park, however, if the owner does not evict tenants for five years, the land sale can go ahead. State law also restricts the annual increase in land lot fee to a cap of 3 percent, unless the landowner demonstrates hardship in a local court, and can then raise the land lot fee by up to 6 percent in a year.[12]

Mobile home parks

[edit]
Meadow Lanes Estates Mobile Home Park, Ames, Iowa, August 2010, during a flood

Mobile homes are often sited in land lease communities known as trailer parks (also 'trailer courts', 'mobile home parks', 'mobile home communities', 'manufactured home communities', 'factory-built home communities' etc.); these communities allow homeowners to rent space on which to place a home. In addition to providing space, the site often provides basic utilities such as water, sewer, electricity, or natural gas and other amenities such as mowing, garbage removal, community rooms, pools, and playgrounds.

There are over 38,000[13] trailer parks in the United States ranging in size from 5 to over 1,000 home sites. Although most parks appeal to meeting basic housing needs, some communities specialize towards certain segments of the market. One subset of mobile home parks, retirement communities, restrict residents to those age 55 and older. Another subset of mobile home parks, seasonal communities, are located in popular vacation destinations or are used as a location for summer homes. In New York State, as of 2019, there were 1,811 parks with 83,929 homes.[12]

Newer homes, particularly double-wides, tend to be built to much higher standards than their predecessors and meet the building codes applicable to most areas. That has led to a reduction in the rate of value depreciation of most used units.[14]

Additionally, modern homes tend to be built from materials similar to those used in site-built homes rather than inferior, lighter-weight materials. They are also more likely to physically resemble site-built homes. Often, the primary differentiation in appearance is that factory-built homes tend to have less of a roof slope so that they can be readily transported underneath bridges and overpasses.[citation needed]

The number of double-wide units sold exceeds the number of single-wides, which is due in part to the aforementioned zoning restrictions. Another reason for higher sales is the spaciousness of double-wide units, which are now comparable to site-built homes. Single-wide units are still popular primarily in rural areas, where there are fewer restrictions. They are frequently used as temporary housing in areas affected by natural disasters when restrictions are temporarily waived.[citation needed]

Another recent trend has been parks in which the owner of the mobile home owns the lot on which their unit is parked. Some of these communities simply provide land in a homogeneous neighborhood, but others are operated more like condominiums with club homes complete with swimming pools and meeting rooms which are shared by all of the residents, who are required to pay membership fees and dues.

By country

[edit]

Mobile home (or mobile-homes) are used in many European campgrounds to refer to fixed caravans, purpose-built cabins, and even large tents, which are rented by the week or even year-round as cheap accommodation, similar to the US concept of a trailer park. Like many other US loanwords, the term is not used widely in Britain.[citation needed]

United Kingdom

[edit]
A mobile home marketed as a holiday home

Mobile Homes or Static Caravans are popular across the United Kingdom. They are more commonly referred to as Park Homes or Leisure Lodges, depending on if they are marketed as a residential dwelling or as a second holiday home residence.

Residential Mobile homes (park homes) are built to the BS3632 standard. This standard is issued by the British Standards Institute. The institute is a UK body who produce a range of standards for businesses and products to ensure they are fit for purpose. The majority of residential parks in the UK have a minimum age limit for their residents, and are generally marketed as retirement or semi-retirement parks. Holiday Homes, static caravans or holiday lodges aren't required to be built to BS3632 standards, but many are built to the standard.

A static caravan park on the cliffs above Beer, Devon, England

In addition to mobile homes, static caravans are popular across the UK. Static caravans have wheels and a rudimentary chassis with no suspension or brakes and are therefore transported on the back of large flatbed lorries, the axle and wheels being used for movement to the final location when the static caravan is moved by tractor or 4×4. A static caravan normally stays on a single plot for many years and has many of the modern conveniences normally found in a home.

Mobile homes are designed and constructed to be transportable by road in one or two sections. Mobile homes are no larger than 20 m × 6.8 m (65 ft 7 in × 22 ft 4 in) with an internal maximum height of 3.05 m (10 ft 0 in). Legally, mobile homes can still be defined as "caravans".

Static holiday caravans generally have sleeping accommodation for 6 to 10 people in 2, 3 or 4 bedrooms and on convertible seating in the lounge referred to as a 'pull out bed'. They tend towards a fairly "open-plan" layout, and while some units are double glazed and centrally heated for year-round use, cheaper models without double glazing or central heating are available for mainly summer use. Static caravan holiday homes are intended for leisure use and are available in 10 and 12 ft (3.0 and 3.7 m) widths, a small number in 13 and 14 ft (4.0 and 4.3 m) widths, and a few 16 ft (4.9 m) wide, consisting of two 8 ft (2.4 m) wide units joined. Generally, holiday homes are clad in painted steel panels, but can be clad in PVC, timber or composite materials. Static caravans are sited on caravan parks where the park operator of the site leases a plot to the caravan owner. There are many holiday parks in the UK in which one's own static caravan can be owned. There are a few of these parks in areas that are prone to flooding and anyone considering buying a sited static caravan needs to take particular care in checking that their site is not liable to flooding.

Static caravans can be rented on an ad-hoc basis or purchased. Purchase prices range from £25,000 to £100,000. Once purchased, static caravans have various ongoing costs including insurance, site fees, local authority rates, utility charges, winterisation and depreciation. Depending on the type of caravan and the park these costs can range from £1,000 to £40,000 per year.[15] Some park owners used to have unfair conditions in their lease contracts but the Office of Fair Trading has produced a guidance document available for download called Unfair Terms in Holiday Caravan Agreements which aims to stop unfair practices.

Israel

[edit]
Posting of caravan in Mitzpe Hila, Israel, 1982

Many Israeli settlements and outposts are originally composed of caravans (Hebrew: קראוואן caravan; pl. קראוואנים, caravanim). They are constructed of light metal, are not insulated but can be outfitted with heating and air-conditioning units, water lines, recessed lighting, and floor tiling to function in a full-service capacity. Starting in 2005, prefabricated homes, named caravillas (Hebrew: קרווילה), a portmanteau of the words caravan, and villa, begin to replace mobile homes in many Israeli settlements.

Difference from modular homes

[edit]

Because of similarities in the manufacturing process, some companies build both types in their factories. Modular homes are transported on flatbed trucks rather than being towed, and lack axles and an automotive-type frame. However, some modular homes are towed behind a semi-truck or toter on a frame similar to that of a trailer. The home is usually in two pieces and is hauled by two separate trucks. Each frame has five or more axles, depending on the size of the home. Once the home has reached its location, the axles and the tongue of the frame are then removed, and the home is set on a concrete foundation by a large crane.

Both styles are commonly referred to as factory-built housing, but that term's technical use is restricted to a class of homes regulated by the Federal National Mfd. Housing Construction and Safety Standards Act of 1974.

Most zoning restrictions on the homes have been found to be inapplicable or only applicable to modular homes. That occurs often after considerable litigation on the topic by affected jurisdictions and by plaintiffs failing to ascertain the difference. Most modern modulars, once fully assembled, are indistinguishable from site-built homes. Their roofs are usually transported as separate units. Newer modulars also come with roofs that can be raised during the setting process with cranes. There are also modulars with 2 to 4 storeys.

[edit]

See also

[edit]
  • All Parks Alliance for Change
  • Campervan
  • Construction trailer
  • Houseboat
  • Manufactured housing
  • Modular home
  • Motorhome
  • Nomadic wagons
  • Recreational vehicle
  • Reefer container housing units
  • Small house movement
  • Trailer (vehicle)
  • Trailer Park Boys
  • Trailer trash
  • Vardo
  • Prefabricated home

References

[edit]
  1. ^ "Part 17, Mobile Home Parks". ny.gov.
  2. ^ "Mobile Manufactured Homes". ct.gov. Retrieved 28 March 2018.
  3. ^ "Caravan Repairs? Great Caravan Repair Deals!". canterburycaravans.com.au.
  4. ^ "Titles for Mobile Homes". AAA Digest of Motor Laws.
  5. ^ Andrews, Jeff (January 29, 2018). "HUD to explore deregulating manufactured housing". Curbed. Archived from the original on 2018-01-29. Retrieved 2019-04-19.
  6. ^ Hackett, Thomas (January 11, 1997). "Extra-wide homes to take to the road". News & Observer. p. A3.
  7. ^ Mitchell, Kirsten B. (January 10, 1997). "Wider trailer transport OK'd". Star-News. p. 1A.
  8. ^ a b Whitacre, Dianne (December 2, 1999). "Mobile-Home Makers Look to Squeeze on N.C. Roads". The Charlotte Observer. p. 1C.
  9. ^ "Study: Keep Curbs on Transporting Wide Mobile Homes". The Charlotte Observer. December 1, 1997. p. 4C.
  10. ^ Bonner, Lynn (January 7, 2000). "Program for wide mobile homes extended". News & Observer. p. A3.
  11. ^ "Wide mobile homes given final approval". News & Observer. June 3, 2000. p. A3.
  12. ^ a b Liberatore, Wendy (January 23, 2022). "Saratoga County's mobile home parks - a sign of an affordable housing crisis". www.timesunion.com. Retrieved January 23, 2022.
  13. ^ "Database of Mobile Home Parks in the United States". Retrieved 2009-02-17.
  14. ^ "Homes". Answers.com. Retrieved 2006-09-12.
  15. ^ "Cost of a static caravan or lodge". StaticCaravanExpert. 28 December 2020. Retrieved 2021-03-07.

Further reading

[edit]
  • Benson, J. E. (1990). Good neighbors: Ethnic relations in Garden City trailer courts. Urban Anthropology,19, 361–386.
  • Burch-Brown, C. (1996). Trailers. Charlottesville: University Press of Virginia. Text by David Rigsbee.
  • Geisler, C. C., & Mitsuda, H. (1987). Mobile-home growth, regulation, and discrimination in upstate New York. Rural Sociology, 52, 532–543.
  • Hart, J. F., Rhodes, M. J., & Morgan, J. T. (2002). The unknown world of the mobile home. Baltimore: Johns Hopkins University Press.
  • MacTavish, K. A., & Salamon, S. (2001). Mobile home park on the prairie: A new rural community form. Rural Sociology, 66, 487–506.
  • Moore, B. (2006). Trailer trash: The world of trailers and mobile homes in the Southwest. Laughlin: Route 66 Magazine.
  • Thornburg, D. A. (1991). Galloping bungalows: The rise and demise of the American house trailer. Hamden: Archon Books.
  • Wallis, A. D. (1991). Wheel estate: The rise and decline of mobile homes. New York: Oxford University Press.
[edit]
  • Regulating body in the UK
  • US Federal Manufactured Home Construction and Safety Standards

 

Photo
Photo
Photo

Driving Directions in Johnson County


Driving Directions From Essense of Australia to Royal Supply Inc
Driving Directions From CommunityAmerica Credit Union to Royal Supply Inc
Driving Directions From ECS Inc. International to Royal Supply Inc
Driving Directions From South Lake Park to Royal Supply Inc
Driving Directions From South Lake Park to Royal Supply Inc
Driving Directions From Black Hoof Park to Royal Supply Inc
Driving Directions From Jacob L. Loose Park to Royal Supply Inc
Driving Directions From Johnson County Welcome Center to Royal Supply Inc
Driving Directions From National WWI Museum and Memorial to Royal Supply Inc

Reviews for Royal Supply Inc


Royal Supply Inc

william mann

(5)

Needed an exterior door in a hurry after storm damaged mine. All the big box stores were days or weeks out on a 34x76 door. Google lead me here, I went in, asked if he had one that size, took me in their warehouse and showed me several options. Found a door I liked, and they had all the additional hardware to install I needed. One stop shop, friendly and helpful. Priced right too.

Royal Supply Inc

Donald Waggoner

(4)

I received a furnace installment from this place and was extremely happy with the furnace installation, but during the installation, they did something to completely make my hot water heater not work. They installed it on Friday at noon, and by the time I realized I had no hot water, it's after they closed, which left me with no hot water. Update: I had to call someone else out to help get my hot water heater fixed and operating correctly. While I am extremely grateful to the company for installing a great furnace, my final review will stay at 4 stars for the fact that the team did not address the hot water heater back to working order. I may use them for further things in the future, but I must leave this review to help others not have the same issues as me.

Royal Supply Inc

Caleb Roye

(5)

incredibly helpful staff. very educated on products and installation.

Royal Supply Inc

Ashley Foster

(5)

In a rush we had to replace our tub/surround in our home. We ordered online with another supplier and had a HORRIBLE experience. A friend recommended Royal Supply and they had exactly what we needed. We paid, loaded our trailer and were gone in less than 15 minutes. They are friendly and very helpful. Would definitely recommend to family and friends.

Royal Supply Inc

J.

(1)

Terrible AC install. Skimped on 90°c fittings for the electric conduit under my house, they used black electrical tape instead, I look under my house to find bare wires that are not in a conduit which is an electrical safety no no and could lead to my house burning down. Left a massive gaping hole in my insulation leaving me to deal with itchy fiberglass myself which I only discovered after a summer of high electricity bills due to terrible insulation.

View GBP

Frequently Asked Questions

Filters should generally be checked every month and replaced or cleaned every 1-3 months, depending on usage and filter type. High-use periods like summer and winter may require more frequent changes.
HEPA filters are highly effective at capturing small particles, while pleated filters offer a good balance between cost and efficiency. Consider MERV ratings between 8-13 for most residential systems to maintain good air quality year-round.
Signs include visibly dirty or clogged filters, reduced airflow from vents, increased dust around your home, or noticing allergy symptoms worsening. These indicate its time to check and possibly replace your filter.
Regularly inspect your system before each major season change (spring/fall), clean vents and registers, ensure outdoor units are free from debris, seal any leaks in ductwork, and maintain a consistent thermostat setting to reduce strain on the system.