Identifying Ways to Seal Air Leaks and Improve Efficiency

Identifying Ways to Seal Air Leaks and Improve Efficiency

Understanding the Basics of HVAC Systems and Their Seasonal Needs

Understanding air leaks and their impact on HVAC systems is crucial for improving energy efficiency and ensuring optimal performance. Air leaks can occur in various parts of a building, such as around windows, doors, and ductwork. These leaks allow conditioned air to escape and unconditioned air to enter, leading to increased energy consumption and higher utility bills.


The primary consequence of air leaks is the strain they place on HVAC systems. Technicians need training specific to mobile home HVAC systems mobile home hvac replacement cost HVAC. When conditioned air escapes through these leaks, the system must work harder to maintain the desired indoor temperature. This not only increases energy use but also accelerates wear and tear on the equipment, potentially shortening its lifespan. Furthermore, air leaks can lead to uneven heating or cooling in different areas of a building, resulting in discomfort for occupants.


To address these issues, it is essential to identify and seal air leaks effectively. One common method for detecting leaks is conducting a blower door test, which measures the airtightness of a building by depressurizing it and locating sources of leakage. Additionally, homeowners can perform simple inspections using incense sticks or thermal cameras to identify less obvious leak points.


Once identified, sealing air leaks can be achieved through various means depending on their location and severity. For instance, weatherstripping is an effective solution for sealing gaps around windows and doors. Caulking can be used to seal cracks in stationary components like window frames or baseboards. For larger openings or more significant structural breaches, expanding foam or rigid foam insulation may be necessary.


Improving ductwork insulation is another critical step in enhancing HVAC efficiency. Leaky ducts can result in significant energy loss as the conditioned air intended for living spaces escapes into unconditioned areas like attics or crawlspaces. Sealing duct joints with mastic sealant or metal-backed tape can significantly reduce these losses.


In addition to reducing energy consumption and wear on HVAC systems, sealing air leaks offers several other benefits. It enhances indoor comfort by eliminating drafts and maintaining consistent temperatures throughout a building. Furthermore, it improves indoor air quality by preventing outdoor pollutants from entering through gaps in the structure.


Overall, understanding the impact of air leaks on HVAC systems underscores the importance of proactive maintenance measures aimed at sealing these vulnerabilities. By taking steps to improve airtightness through proper identification techniques and appropriate sealing methods, homeowners can enjoy enhanced comfort levels while simultaneously reducing their environmental footprint and saving on energy costs.

Air leaks are a pervasive issue in both residential and commercial buildings, often leading to higher energy bills, reduced comfort, and increased environmental impact. Identifying common areas for air leaks and implementing effective sealing strategies can significantly improve energy efficiency and occupant satisfaction. This essay delves into the typical sources of air leaks and explores methods to address them.


In residential settings, some of the most prevalent areas where air leaks occur include windows, doors, attics, basements, and electrical outlets. Windows and doors are primary culprits due to their constant use and exposure to external elements. Over time, seals around windows can deteriorate, allowing drafts to permeate the home. Similarly, doors that do not fit snugly or lack proper weatherstripping can become major sources of heat loss.


Attics are another significant area for potential air leaks. Heat naturally rises, making poorly insulated or sealed attics a conduit for warmth escaping during winter months or entering during summer months. Often overlooked are basements; cracks in foundation walls or gaps around pipes can lead to substantial air leakage.


In commercial buildings, the scale may be larger but the principles remain similar. Large expanses of glass in office spaces can lead to considerable heat exchange if not properly sealed or insulated. Additionally, HVAC systems in commercial settings are often extensive and complex; improper sealing around ductwork can result in significant energy loss.


To combat these inefficiencies, several strategies can be employed across both residential and commercial properties. For windows and doors, applying caulking or weatherstripping is an immediate step that homeowners or facility managers can take to reduce drafts. In cases where windows are particularly old or inefficient, replacement with double-glazed options might be more cost-effective in the long run.


Insulating attics with appropriate materials such as fiberglass batts or spray foam insulation is crucial for minimizing thermal transfer between living spaces and exterior environments. Similarly, ensuring that basement walls have adequate sealing against moisture and air leakage will help maintain consistent indoor temperatures.


For commercial buildings specifically, regular maintenance checks on HVAC systems should include inspections for any leaks around ductwork joints; using mastic sealant tapes can effectively close off these gaps. Furthermore, investing in automated building management systems that monitor indoor climate conditions can offer insights into potential inefficiencies caused by unseen air leaks.


In conclusion, addressing common areas for air leaks is essential in improving energy efficiency within both residential and commercial contexts. By systematically identifying vulnerable spots like windows, doors, attics, basements-and even extending this vigilance towards expansive HVAC networks-occupants can reap financial savings while contributing positively towards environmental conservation efforts. The key lies not just in identifying these problem areas but also in taking decisive action through appropriate sealing techniques tailored to each unique situation.

More About Us

Janeznovak1702

What Yelp Says About Us

How to reach us


Energy-Efficient Cooling Solutions for Mobile Homes in Warm Climates

Energy-Efficient Cooling Solutions for Mobile Homes in Warm Climates

In recent years, the challenge of keeping mobile homes cool in warm climates has become a pressing concern, especially as global temperatures continue to rise.. Mobile homes, by their very nature, often lack the structural insulation and space for traditional cooling systems found in permanent residences.

Posted by on 2024-12-23

Experts Recommend Biannual HVAC Maintenance for Mobile Homes to Reduce Repairs

Experts Recommend Biannual HVAC Maintenance for Mobile Homes to Reduce Repairs

Choosing a reliable HVAC service provider for your mobile home is essential to ensure comfort, efficiency, and longevity of your systems.. With the unique structure and requirements of mobile homes, selecting the right professional can make a significant difference in maintaining optimal indoor climates and avoiding unnecessary repairs.

Posted by on 2024-12-23

Summer Strategies: Keeping Your HVAC Running Efficiently in Peak Heat

In the quest for energy efficiency and sustainability, one of the most overlooked yet impactful aspects is the detection and sealing of air leaks in buildings. Air leaks, often invisible to the naked eye, can significantly undermine energy efficiency by allowing conditioned air to escape and unconditioned air to infiltrate. This not only increases energy bills but also compromises indoor comfort and can lead to issues such as moisture problems and poor indoor air quality. Therefore, understanding methods for detecting these leaks is crucial in any effort to enhance a building's performance.


One of the most effective tools for identifying air leaks is the blower door test. This diagnostic tool measures a building's airtightness by using a powerful fan mounted on an exterior door frame to depressurize or pressurize the house. As this process occurs, it becomes easier to identify areas where air is leaking through observable pressure differences. The blower door test provides quantitative data that can highlight how well-sealed a building is compared to industry standards.


Thermal imaging cameras are another invaluable tool in detecting air leaks. By capturing infrared radiation or heat emitted from surfaces, these cameras reveal temperature variations that indicate potential leakage points. In colder weather, warm interior spots visible from outside or cool spots inside suggest areas where insulation might be compromised or where air could be seeping through gaps.


Smoke pencils or smoke sticks offer simple yet effective means for visually pinpointing smaller leaks around windows, doors, electrical outlets, and other penetrations in the building envelope. When placed near suspected leak sites while doors and windows are closed, dyed smoke from these devices will be drawn outwards or sucked inwards if there's a draft present-making even subtle leakage visible.


Beyond tools lies technique; skilled practitioners often employ observational strategies alongside technology-based solutions. For instance, during windy days or under specific conditions like when HVAC systems are running at full capacity, professionals may detect audible whistling sounds or feel drafts that hint at leak locations without needing specialized equipment.


Once identified, sealing these leaks becomes imperative for improving efficiency. Common techniques include caulking around stationary elements like window frames and applying weatherstripping on movable components such as doors. Expanding foam insulation can effectively fill larger gaps around plumbing pipes or ductwork penetrations.


Moreover, addressing ductwork integrity is vital since ducts that carry heated or cooled air throughout buildings can themselves be sources of significant loss if not properly sealed with mastic sealant or metal-backed tape specifically designed for this purpose.


In conclusion, detecting and sealing air leaks requires a comprehensive approach that combines advanced tools with keen observation skills and practical techniques. By investing time in identifying these hidden inefficiencies within our homes and workplaces-and subsequently remedying them-we not only save money but also contribute positively towards environmental conservation efforts by reducing unnecessary energy consumption. The pursuit of airtightness presents itself as both an art form steeped in scientific precision and an essential practice within modern-day construction management aimed at fostering sustainable living environments for future generations.

Summer Strategies: Keeping Your HVAC Running Efficiently in Peak Heat

Fall Preparations: Transitioning from Cooling to Heating

When it comes to sealing air leaks and improving energy efficiency in homes, homeowners are often faced with the choice between tackling the project themselves or hiring professional services. Both approaches have their merits, and understanding the differences can help one make an informed decision.


DIY solutions for sealing air leaks are popular among those who enjoy hands-on projects and wish to save money. The materials required for such tasks, like caulking, weatherstripping, and spray foam, are readily available at local hardware stores. With a plethora of online tutorials and guides, even a novice can attempt to seal common problem areas such as windows, doors, and attics. The immediate advantage of DIY solutions is cost savings; by eliminating labor costs associated with hiring professionals, homeowners can address air leaks on a budget. Additionally, these projects offer a sense of personal accomplishment and provide flexibility in choosing materials and methods.


However, while DIY efforts can be effective for minor leaks, they may not suffice for more extensive issues or complex structures. This is where professional services come into play. Hiring experts ensures that every nook and cranny is inspected by trained eyes who know precisely what to look for. Professionals utilize advanced tools like blower door tests and infrared cameras to detect leaks that might be invisible to the untrained eye. Their expertise allows them to recommend comprehensive solutions tailored to the specific needs of a home.


Moreover, professional services often come with warranties or guarantees on their work-a reassurance that DIY projects cannot easily offer. For individuals who lack time or physical ability to undertake such tasks themselves, hiring professionals provides peace of mind knowing that the job will be completed efficiently and effectively.


In deciding between DIY solutions and professional services for sealing air leaks, it ultimately boils down to weighing one's priorities: cost versus convenience; personal satisfaction versus guaranteed results; basic fixes versus thorough evaluations. Some may choose a hybrid approach-starting with DIY tasks for accessible areas while reserving complex problems for professionals.


Regardless of the chosen path, addressing air leaks plays a crucial role in enhancing energy efficiency within homes. By reducing unwanted drafts through either self-initiative or expert intervention-or both-homeowners contribute not only towards lowering utility bills but also promoting environmental sustainability by conserving energy resources more judiciously.

Winter Tips: Ensuring Optimal Performance During Cold Months

Sealing air leaks in buildings is an often overlooked yet crucial step towards enhancing energy efficiency and achieving significant cost savings. The importance of this simple measure cannot be overstated, as it directly impacts both the environmental footprint of a household or business and the financial burden associated with heating and cooling costs. By identifying ways to seal air leaks, individuals can make strides toward a more sustainable and economically prudent future.


Air leaks occur when there are cracks or gaps in a building's envelope, allowing unwanted air exchange between the indoor environment and the outside world. Common areas where these leaks are found include windows, doors, electrical outlets, plumbing fixtures, and even through walls. Each small crevice contributes to a larger cumulative effect: increased energy consumption due to the HVAC systems working harder to maintain desired indoor temperatures.


The benefits of sealing these air leaks begin with enhanced energy efficiency. When a home or office is properly sealed, less conditioned air escapes, meaning that heating systems require less fuel in winter months while cooling systems use less electricity during summer. This not only reduces overall energy usage but also helps to lower greenhouse gas emissions associated with excessive energy production, making it an environmentally responsible choice.


Beyond environmental benefits, sealing air leaks translates into substantial cost savings over time. The reduction in energy consumption directly correlates with lower utility bills. According to studies by energy experts, homeowners can save up to 20% on heating and cooling costs simply by addressing drafty areas around their buildings. For businesses operating on larger scales or across multiple locations, these savings can accumulate significantly over time.


To identify ways to seal air leaks effectively, one must first conduct a thorough inspection of their property. This may involve visual checks for obvious gaps around windows and doors or using specialized equipment like thermal cameras to detect subtle temperature variations that indicate hidden leaks. Once identified, various methods can be employed to seal these vulnerabilities: caulking for small cracks around stationary components such as window frames; weatherstripping for movable parts like doors; and expanding foam for larger gaps in unseen areas such as basements or attics.


An often underappreciated aspect of sealing air leaks is its contribution to indoor comfort levels. Without drafts disrupting consistent temperature control within spaces, inhabitants experience more stable environments conducive to both relaxation at home and productivity at work.


In conclusion, sealing air leaks presents itself as an accessible yet highly effective strategy for boosting energy efficiency while simultaneously reducing utility expenses. By taking proactive steps towards identifying potential leak sources within any structure-be it residential or commercial-individuals play an active role not only in managing their finances better but also in contributing positively toward broader environmental conservation efforts. As society increasingly emphasizes sustainability alongside economic viability into everyday practices-sealing those pesky drafts has never been more relevant than now!

Year-Round Monitoring and Regular Inspections for Longevity

Maintaining an efficient HVAC system year-round is crucial for ensuring comfort, reducing energy costs, and minimizing environmental impact. One of the key aspects of achieving this efficiency lies in identifying ways to seal air leaks and improve overall system performance. Air leaks can significantly hinder the effectiveness of an HVAC system by allowing conditioned air to escape and unconditioned air to enter, leading to increased energy consumption and decreased indoor comfort.


The first step in addressing air leaks is performing a thorough inspection of your home or building. This involves checking areas most susceptible to leaks, such as windows, doors, vents, and any openings where utilities enter the building. Simple tests like feeling for drafts or using incense sticks near suspected leak points can help identify problem areas. More sophisticated methods include using infrared cameras or blower door tests conducted by professionals, which can provide a comprehensive picture of where leaks are occurring.


Once these leaks are identified, sealing them effectively is paramount. Weatherstripping and caulking are two common solutions that offer immediate results. Weatherstripping works well around movable components like doors and windows, while caulk is suitable for stationary elements like window frames or baseboards. For larger gaps often found in attics or basements, expanding foam can be used to fill voids where traditional materials may not suffice.


In addition to sealing existing leaks, improving insulation throughout the building plays a significant role in enhancing HVAC efficiency. Properly insulated walls, ceilings, and floors act as barriers that prevent heat transfer between indoor and outdoor environments. This means less strain on your HVAC system as it works to maintain desired temperature settings year-round.


Moreover, regular maintenance of the HVAC system itself supports its efficiency over time. This includes cleaning filters monthly during high-use seasons to ensure unobstructed airflow; scheduling annual professional inspections to check for wear and tear on components such as coils or fans; and ensuring that ductwork is clean and free from obstructions that could impede air movement.


Finally, considering technological upgrades can also contribute significantly to improving system efficiency. Installing programmable thermostats allows for precise control over heating and cooling schedules based on occupancy patterns, thereby reducing unnecessary energy usage when spaces are unoccupied. Additionally, investing in high-efficiency equipment can lead to long-term savings through reduced operational costs.


In conclusion, maintaining an efficient HVAC system requires ongoing attention to sealing air leaks and optimizing performance through insulation improvements and routine maintenance checks. By taking these proactive measures seriously-identifying potential issues early on with diligent inspections; applying appropriate sealing methods; reinforcing insulation; staying committed to regular upkeep; and embracing technological advancements-homeowners can enjoy enhanced comfort levels while simultaneously decreasing their environmental footprint year after year.

Mobile homes with detached single car garages

A mobile home (also known as a house trailer, park home, trailer, or trailer home) is a prefabricated structure, built in a factory on a permanently attached chassis before being transported to site (either by being towed or on a trailer). Used as permanent homes, or for holiday or temporary accommodation, they are often left permanently or semi-permanently in one place, but can be moved, and may be required to move from time to time for legal reasons.

Mobile homes share the same historic origins as travel trailers, but today the two are very different, with travel trailers being used primarily as temporary or vacation homes. Behind the cosmetic work fitted at installation to hide the base, mobile homes have strong trailer frames, axles, wheels, and tow-hitches.

History

[edit]

In the United States, this form of housing goes back to the early years of cars and motorized highway travel.[1] It was derived from the travel trailer (often referred to during the early years as "house trailers" or "trailer coaches"), a small unit with wheels attached permanently, often used for camping or extended travel. The original rationale for this type of housing was its mobility. Units were initially marketed primarily to people whose lifestyle required mobility. However, in the 1950s, the homes began to be marketed primarily as an inexpensive form of housing designed to be set up and left in a location for long periods of time or even permanently installed with a masonry foundation. Previously, units had been eight feet or fewer in width, but in 1956, the 10-foot (3.0 m) wide home ("ten-wide") was introduced, along with the new term "mobile home".[2]

The homes were given a rectangular shape, made from pre-painted aluminum panels, rather than the streamlined shape of travel trailers, which were usually painted after assembly. All of this helped increase the difference between these homes and home/travel trailers. The smaller, "eight-wide" units could be moved simply with a car, but the larger, wider units ("ten-wide", and, later, "twelve-wide") usually required the services of a professional trucking company, and, often, a special moving permit from a state highway department. During the late 1960s and early 1970s, the homes were made even longer and wider, making the mobility of the units more difficult. Nowadays, when a factory-built home is moved to a location, it is usually kept there permanently and the mobility of the units has considerably decreased. In some states, mobile homes have been taxed as personal property if the wheels remain attached, but as real estate if the wheels are removed. Removal of the tongue and axles may also be a requirement for real estate classification.

Manufactured home

[edit]
Example of a modern manufactured home in New Alexandria, Pennsylvania. 28 by 60 feet (8.5 m × 18.3 m)
Manufactured home foundation

Mobile homes built in the United States since June 1976, legally referred to as manufactured homes, are required to meet FHA certification requirements and come with attached metal certification tags. Mobile homes permanently installed on owned land are rarely mortgageable, whereas FHA code manufactured homes are mortgageable through VA, FHA, and Fannie Mae.

Many people who could not afford a traditional site-built home, or did not desire to commit to spending a large sum of money on housing, began to see factory-built homes as a viable alternative for long-term housing needs. The units were often marketed as an alternative to apartment rental. However, the tendency of the units of this era to depreciate rapidly in resale value[citation needed] made using them as collateral for loans much riskier than traditional home loans. Terms were usually limited to less than the thirty-year term typical of the general home-loan market, and interest rates were considerably higher.[citation needed] In that way, mobile home loans resembled motor vehicle loans more than traditional home mortgage loans.

Construction and sizes

[edit]
Exterior wall assemblies being set in place during manufacture

Mobile homes come in two major sizes, single-wides and double-wides. Single-wides are 18 feet (5.5 m) or less in width and 90 feet (27 m) or less in length and can be towed to their site as a single unit. Double-wides are 20 feet (6.1 m) or more wide and are 90 feet (27 m) in length or less and are towed to their site in two separate units, which are then joined. Triple-wides and even homes with four, five, or more units are also built but less frequently.

While site-built homes are rarely moved, single-wide owners often "trade" or sell their home to a dealer in the form of the reduction of the purchase of a new home. These "used" homes are either re-sold to new owners or to park owners who use them as inexpensive rental units. Single-wides are more likely to be traded than double-wides because removing them from the site is easier. In fact, only about 5% of all double-wides will ever be moved.[citation needed]

While an EF1 tornado might cause minor damage to a site-built home, it could do significant damage to a factory-built home, especially an older model or one that is not properly secured. Also, structural components (such as windows) are typically weaker than those in site-built homes.[3] 70 miles per hour (110 km/h) winds can destroy a mobile home in a matter of minutes. Many brands offer optional hurricane straps, which can be used to tie the home to anchors embedded in the ground.

Regulations

[edit]

United States

[edit]
Home struck by tornado

In the United States, mobile homes are regulated by the US Department of Housing and Urban Development (HUD), via the Federal National Manufactured Housing Construction and Safety Standards Act of 1974. This national regulation has allowed many manufacturers to distribute nationwide because they are immune to the jurisdiction of local building authorities.[4] [5]: 1  By contrast, producers of modular homes must abide by state and local building codes. There are, however, wind zones adopted by HUD that home builders must follow. For example, statewide, Florida is at least wind zone 2. South Florida is wind zone 3, the strongest wind zone. After Hurricane Andrew in 1992, new standards were adopted for home construction. The codes for building within these wind zones were significantly amended, which has greatly increased their durability. During the 2004 hurricanes in Florida, these standards were put to the test, with great success. Yet, older models continue to face the exposed risk to high winds because of the attachments applied such as carports, porch and screen room additions. Such areas are exposed to "wind capture" which apply extreme force to the underside of the integrated roof panel systems, ripping the fasteners through the roof pan causing a series of events which destroys the main roof system and the home.

The popularity of the factory-built homes caused complications the legal system was not prepared to handle. Originally, factory-built homes tended to be taxed as vehicles rather than real estate, which resulted in very low property tax rates for their inhabitants. That caused local governments to reclassify them for taxation purposes.

However, even with that change, rapid depreciation often resulted in the home occupants paying far less in property taxes than had been anticipated and budgeted. The ability to move many factory-built homes rapidly into a relatively small area resulted in strains to the infrastructure and governmental services of the affected areas, such as inadequate water pressure and sewage disposal, and highway congestion. That led jurisdictions to begin placing limitations on the size and density of developments.

Early homes, even those that were well-maintained, tended to depreciate over time, much like motor vehicles. That is in contrast to site-built homes which include the land they are built on and tend to appreciate in value. The arrival of mobile homes in an area tended to be regarded with alarm, in part because of the devaluation of the housing potentially spreading to preexisting structures.

This combination of factors has caused most jurisdictions to place zoning regulations on the areas in which factory-built homes are placed, and limitations on the number and density of homes permitted on any given site. Other restrictions, such as minimum size requirements, limitations on exterior colors and finishes, and foundation mandates have also been enacted. There are many jurisdictions that will not allow the placement of any additional factory-built homes. Others have strongly limited or forbidden all single-wide models, which tend to depreciate more rapidly than modern double-wide models.

Apart from all the practical issues described above, there is also the constant discussion about legal fixture and chattels and so the legal status of a trailer is or could be affected by its incorporation to the land or not. This sometimes involves such factors as whether or not the wheels have been removed.

North Carolina

[edit]

The North Carolina Board of Transportation allowed 14-foot-wide homes on the state's roads, but until January 1997, 16-foot-wide homes were not allowed. 41 states allowed 16-foot-wide homes, but they were not sold in North Carolina. Under a trial program approved January 10, 1997, the wider homes could be delivered on specific roads at certain times of day and travel 10 mph below the speed limit, with escort vehicles in front and behind.[6][7] Eventually, all homes had to leave the state on interstate highways.[8]

In December 1997, a study showed that the wider homes could be delivered safely, but some opponents still wanted the program to end.[9] On December 2, 1999, the NC Manufactured Housing Institute asked the state Board of Transportation to expand the program to allow deliveries of 16-foot-wide homes within North Carolina.[8] A month later, the board extended the pilot program by three months but did not vote to allow shipments within the state.[10] In June 2000, the board voted to allow 16-foot-side homes to be shipped to other states on more two-lane roads, and to allow shipments in the state east of US 220. A third escort was required, including a law enforcement officer on two-lane roads.[11]

New York

[edit]

In New York State, the Homes and Community Renewal agency tracks mobile home parks and provides regulations concerning them. For example, the agency requires park owners to provide residents with a $15,000 grant if residents are forced to move when the land is transferred to a new owner. Residents are also granted the right of first refusal for a sale of the park, however, if the owner does not evict tenants for five years, the land sale can go ahead. State law also restricts the annual increase in land lot fee to a cap of 3 percent, unless the landowner demonstrates hardship in a local court, and can then raise the land lot fee by up to 6 percent in a year.[12]

Mobile home parks

[edit]
Meadow Lanes Estates Mobile Home Park, Ames, Iowa, August 2010, during a flood

Mobile homes are often sited in land lease communities known as trailer parks (also 'trailer courts', 'mobile home parks', 'mobile home communities', 'manufactured home communities', 'factory-built home communities' etc.); these communities allow homeowners to rent space on which to place a home. In addition to providing space, the site often provides basic utilities such as water, sewer, electricity, or natural gas and other amenities such as mowing, garbage removal, community rooms, pools, and playgrounds.

There are over 38,000[13] trailer parks in the United States ranging in size from 5 to over 1,000 home sites. Although most parks appeal to meeting basic housing needs, some communities specialize towards certain segments of the market. One subset of mobile home parks, retirement communities, restrict residents to those age 55 and older. Another subset of mobile home parks, seasonal communities, are located in popular vacation destinations or are used as a location for summer homes. In New York State, as of 2019, there were 1,811 parks with 83,929 homes.[12]

Newer homes, particularly double-wides, tend to be built to much higher standards than their predecessors and meet the building codes applicable to most areas. That has led to a reduction in the rate of value depreciation of most used units.[14]

Additionally, modern homes tend to be built from materials similar to those used in site-built homes rather than inferior, lighter-weight materials. They are also more likely to physically resemble site-built homes. Often, the primary differentiation in appearance is that factory-built homes tend to have less of a roof slope so that they can be readily transported underneath bridges and overpasses.[citation needed]

The number of double-wide units sold exceeds the number of single-wides, which is due in part to the aforementioned zoning restrictions. Another reason for higher sales is the spaciousness of double-wide units, which are now comparable to site-built homes. Single-wide units are still popular primarily in rural areas, where there are fewer restrictions. They are frequently used as temporary housing in areas affected by natural disasters when restrictions are temporarily waived.[citation needed]

Another recent trend has been parks in which the owner of the mobile home owns the lot on which their unit is parked. Some of these communities simply provide land in a homogeneous neighborhood, but others are operated more like condominiums with club homes complete with swimming pools and meeting rooms which are shared by all of the residents, who are required to pay membership fees and dues.

By country

[edit]

Mobile home (or mobile-homes) are used in many European campgrounds to refer to fixed caravans, purpose-built cabins, and even large tents, which are rented by the week or even year-round as cheap accommodation, similar to the US concept of a trailer park. Like many other US loanwords, the term is not used widely in Britain.[citation needed]

United Kingdom

[edit]
A mobile home marketed as a holiday home

Mobile Homes or Static Caravans are popular across the United Kingdom. They are more commonly referred to as Park Homes or Leisure Lodges, depending on if they are marketed as a residential dwelling or as a second holiday home residence.

Residential Mobile homes (park homes) are built to the BS3632 standard. This standard is issued by the British Standards Institute. The institute is a UK body who produce a range of standards for businesses and products to ensure they are fit for purpose. The majority of residential parks in the UK have a minimum age limit for their residents, and are generally marketed as retirement or semi-retirement parks. Holiday Homes, static caravans or holiday lodges aren't required to be built to BS3632 standards, but many are built to the standard.

A static caravan park on the cliffs above Beer, Devon, England

In addition to mobile homes, static caravans are popular across the UK. Static caravans have wheels and a rudimentary chassis with no suspension or brakes and are therefore transported on the back of large flatbed lorries, the axle and wheels being used for movement to the final location when the static caravan is moved by tractor or 4×4. A static caravan normally stays on a single plot for many years and has many of the modern conveniences normally found in a home.

Mobile homes are designed and constructed to be transportable by road in one or two sections. Mobile homes are no larger than 20 m × 6.8 m (65 ft 7 in × 22 ft 4 in) with an internal maximum height of 3.05 m (10 ft 0 in). Legally, mobile homes can still be defined as "caravans".

Static holiday caravans generally have sleeping accommodation for 6 to 10 people in 2, 3 or 4 bedrooms and on convertible seating in the lounge referred to as a 'pull out bed'. They tend towards a fairly "open-plan" layout, and while some units are double glazed and centrally heated for year-round use, cheaper models without double glazing or central heating are available for mainly summer use. Static caravan holiday homes are intended for leisure use and are available in 10 and 12 ft (3.0 and 3.7 m) widths, a small number in 13 and 14 ft (4.0 and 4.3 m) widths, and a few 16 ft (4.9 m) wide, consisting of two 8 ft (2.4 m) wide units joined. Generally, holiday homes are clad in painted steel panels, but can be clad in PVC, timber or composite materials. Static caravans are sited on caravan parks where the park operator of the site leases a plot to the caravan owner. There are many holiday parks in the UK in which one's own static caravan can be owned. There are a few of these parks in areas that are prone to flooding and anyone considering buying a sited static caravan needs to take particular care in checking that their site is not liable to flooding.

Static caravans can be rented on an ad-hoc basis or purchased. Purchase prices range from £25,000 to £100,000. Once purchased, static caravans have various ongoing costs including insurance, site fees, local authority rates, utility charges, winterisation and depreciation. Depending on the type of caravan and the park these costs can range from £1,000 to £40,000 per year.[15] Some park owners used to have unfair conditions in their lease contracts but the Office of Fair Trading has produced a guidance document available for download called Unfair Terms in Holiday Caravan Agreements which aims to stop unfair practices.

Israel

[edit]
Posting of caravan in Mitzpe Hila, Israel, 1982

Many Israeli settlements and outposts are originally composed of caravans (Hebrew: קראוואן caravan; pl. קראוואנים, caravanim). They are constructed of light metal, are not insulated but can be outfitted with heating and air-conditioning units, water lines, recessed lighting, and floor tiling to function in a full-service capacity. Starting in 2005, prefabricated homes, named caravillas (Hebrew: קרווילה), a portmanteau of the words caravan, and villa, begin to replace mobile homes in many Israeli settlements.

Difference from modular homes

[edit]

Because of similarities in the manufacturing process, some companies build both types in their factories. Modular homes are transported on flatbed trucks rather than being towed, and lack axles and an automotive-type frame. However, some modular homes are towed behind a semi-truck or toter on a frame similar to that of a trailer. The home is usually in two pieces and is hauled by two separate trucks. Each frame has five or more axles, depending on the size of the home. Once the home has reached its location, the axles and the tongue of the frame are then removed, and the home is set on a concrete foundation by a large crane.

Both styles are commonly referred to as factory-built housing, but that term's technical use is restricted to a class of homes regulated by the Federal National Mfd. Housing Construction and Safety Standards Act of 1974.

Most zoning restrictions on the homes have been found to be inapplicable or only applicable to modular homes. That occurs often after considerable litigation on the topic by affected jurisdictions and by plaintiffs failing to ascertain the difference. Most modern modulars, once fully assembled, are indistinguishable from site-built homes. Their roofs are usually transported as separate units. Newer modulars also come with roofs that can be raised during the setting process with cranes. There are also modulars with 2 to 4 storeys.

[edit]

See also

[edit]
  • All Parks Alliance for Change
  • Campervan
  • Construction trailer
  • Houseboat
  • Manufactured housing
  • Modular home
  • Motorhome
  • Nomadic wagons
  • Recreational vehicle
  • Reefer container housing units
  • Small house movement
  • Trailer (vehicle)
  • Trailer Park Boys
  • Trailer trash
  • Vardo
  • Prefabricated home

References

[edit]
  1. ^ "Part 17, Mobile Home Parks". ny.gov.
  2. ^ "Mobile Manufactured Homes". ct.gov. Retrieved 28 March 2018.
  3. ^ "Caravan Repairs? Great Caravan Repair Deals!". canterburycaravans.com.au.
  4. ^ "Titles for Mobile Homes". AAA Digest of Motor Laws.
  5. ^ Andrews, Jeff (January 29, 2018). "HUD to explore deregulating manufactured housing". Curbed. Archived from the original on 2018-01-29. Retrieved 2019-04-19.
  6. ^ Hackett, Thomas (January 11, 1997). "Extra-wide homes to take to the road". News & Observer. p. A3.
  7. ^ Mitchell, Kirsten B. (January 10, 1997). "Wider trailer transport OK'd". Star-News. p. 1A.
  8. ^ a b Whitacre, Dianne (December 2, 1999). "Mobile-Home Makers Look to Squeeze on N.C. Roads". The Charlotte Observer. p. 1C.
  9. ^ "Study: Keep Curbs on Transporting Wide Mobile Homes". The Charlotte Observer. December 1, 1997. p. 4C.
  10. ^ Bonner, Lynn (January 7, 2000). "Program for wide mobile homes extended". News & Observer. p. A3.
  11. ^ "Wide mobile homes given final approval". News & Observer. June 3, 2000. p. A3.
  12. ^ a b Liberatore, Wendy (January 23, 2022). "Saratoga County's mobile home parks - a sign of an affordable housing crisis". www.timesunion.com. Retrieved January 23, 2022.
  13. ^ "Database of Mobile Home Parks in the United States". Retrieved 2009-02-17.
  14. ^ "Homes". Answers.com. Retrieved 2006-09-12.
  15. ^ "Cost of a static caravan or lodge". StaticCaravanExpert. 28 December 2020. Retrieved 2021-03-07.

Further reading

[edit]
  • Benson, J. E. (1990). Good neighbors: Ethnic relations in Garden City trailer courts. Urban Anthropology,19, 361–386.
  • Burch-Brown, C. (1996). Trailers. Charlottesville: University Press of Virginia. Text by David Rigsbee.
  • Geisler, C. C., & Mitsuda, H. (1987). Mobile-home growth, regulation, and discrimination in upstate New York. Rural Sociology, 52, 532–543.
  • Hart, J. F., Rhodes, M. J., & Morgan, J. T. (2002). The unknown world of the mobile home. Baltimore: Johns Hopkins University Press.
  • MacTavish, K. A., & Salamon, S. (2001). Mobile home park on the prairie: A new rural community form. Rural Sociology, 66, 487–506.
  • Moore, B. (2006). Trailer trash: The world of trailers and mobile homes in the Southwest. Laughlin: Route 66 Magazine.
  • Thornburg, D. A. (1991). Galloping bungalows: The rise and demise of the American house trailer. Hamden: Archon Books.
  • Wallis, A. D. (1991). Wheel estate: The rise and decline of mobile homes. New York: Oxford University Press.
[edit]
  • Regulating body in the UK
  • US Federal Manufactured Home Construction and Safety Standards

 

Photo
Photo
Photo
Photo
Photo

Driving Directions in Johnson County


Driving Directions From Braun Richard E MD to Royal Supply Inc
Driving Directions From EducationDynamics LLC to Royal Supply Inc
Driving Directions From Motel 6 Lenexa, KS - Kansas City Southwest to Royal Supply Inc
Driving Directions From Overland Park to Royal Supply Inc
Driving Directions From Pq Corporation to Royal Supply Inc
Driving Directions From Ernie Miller Park & Nature Center to Royal Supply Inc
Driving Directions From Black Hoof Park to Royal Supply Inc
Driving Directions From Frontier Park to Royal Supply Inc
Driving Directions From South Lake Park to Royal Supply Inc
Driving Directions From Sauer Castle to Royal Supply Inc
Driving Directions From Johnson County Welcome Center to Royal Supply Inc

Reviews for Royal Supply Inc


Royal Supply Inc

Caleb Roye

(5)

incredibly helpful staff. very educated on products and installation.

Royal Supply Inc

J.

(1)

Terrible AC install. Skimped on 90°c fittings for the electric conduit under my house, they used black electrical tape instead, I look under my house to find bare wires that are not in a conduit which is an electrical safety no no and could lead to my house burning down. Left a massive gaping hole in my insulation leaving me to deal with itchy fiberglass myself which I only discovered after a summer of high electricity bills due to terrible insulation.

Royal Supply Inc

william mann

(5)

Needed an exterior door in a hurry after storm damaged mine. All the big box stores were days or weeks out on a 34x76 door. Google lead me here, I went in, asked if he had one that size, took me in their warehouse and showed me several options. Found a door I liked, and they had all the additional hardware to install I needed. One stop shop, friendly and helpful. Priced right too.

Royal Supply Inc

Donald Waggoner

(4)

I received a furnace installment from this place and was extremely happy with the furnace installation, but during the installation, they did something to completely make my hot water heater not work. They installed it on Friday at noon, and by the time I realized I had no hot water, it's after they closed, which left me with no hot water. Update: I had to call someone else out to help get my hot water heater fixed and operating correctly. While I am extremely grateful to the company for installing a great furnace, my final review will stay at 4 stars for the fact that the team did not address the hot water heater back to working order. I may use them for further things in the future, but I must leave this review to help others not have the same issues as me.

Royal Supply Inc

Ashley Foster

(5)

In a rush we had to replace our tub/surround in our home. We ordered online with another supplier and had a HORRIBLE experience. A friend recommended Royal Supply and they had exactly what we needed. We paid, loaded our trailer and were gone in less than 15 minutes. They are friendly and very helpful. Would definitely recommend to family and friends.

View GBP

Frequently Asked Questions

Common signs include drafts near windows or doors, uneven heating or cooling, higher energy bills, and noticeable temperature fluctuations between rooms.
Conduct a visual inspection for gaps or cracks around windows, doors, electrical outlets, and plumbing penetrations. You can also perform a smoke test by holding an incense stick near potential leak sites to see if the smoke wavers.
Caulk is used for sealing small cracks and gaps around stationary fixtures like window frames. Weatherstripping is ideal for moving components like doors. Expanding foam can fill larger gaps in walls or around pipes.
Its beneficial to inspect your home biannually—once before winter and once before summer—to ensure that any new leaks are addressed promptly as they can significantly impact heating and cooling efficiency.
Regularly changing air filters, scheduling routine maintenance checks for your HVAC system, using programmable thermostats, adding insulation where needed, and ensuring vents are unobstructed will all contribute to better efficiency.