Common Misconceptions About Energy Efficient HVAC

Common Misconceptions About Energy Efficient HVAC

Understanding the Basics of HVAC Systems and Their Seasonal Needs

As we navigate the seasonal changes throughout the year, our HVAC (Heating, Ventilation, and Air Conditioning) systems play a crucial role in maintaining comfort within our homes and workplaces. Outdoor compressor units should be shielded from debris and weather exposure Mobile Home Hvac Service temperature. However, there are several common misconceptions about energy-efficient HVAC systems that can lead to inefficient use and increased energy costs. Understanding these misconceptions is key to making informed decisions about how we adjust our HVAC settings seasonally.


One prevalent misconception is that simply investing in an energy-efficient HVAC system will automatically result in lower energy bills. While modern systems are designed to be more efficient, they require proper usage and maintenance to achieve their full potential. For example, during the winter months, it's important not only to rely on your system but also to ensure your home is properly insulated. Drafts around windows and doors can cause significant heat loss, forcing even the most efficient systems to work harder than necessary.


Another misunderstanding involves thermostat settings. Many people believe that setting the thermostat higher or lower than needed will heat or cool a space more quickly; however, this isn't true. An HVAC system works at a consistent rate until it reaches the desired temperature. Therefore, extreme adjustments do not speed up the process but instead waste energy. During summer or winter transitions, gradually adjusting your thermostat by just a few degrees can help maintain comfort without excessive energy use.


Regular maintenance is another area often overlooked due to misconceptions about new systems needing little attention. Even state-of-the-art units require regular check-ups to operate efficiently. Filters should be changed frequently regardless of the season to ensure optimal air flow and quality. Additionally, professional inspections before peak heating or cooling seasons can prevent small issues from becoming costly repairs.


Finally, there's a belief that turning off the HVAC system entirely when leaving home saves energy. In reality, this can lead to greater consumption once turned back on as more power is needed to return rooms to comfortable temperatures. Instead, utilizing programmable thermostats allows for strategic temperature adjustments based on occupancy patterns without sacrificing efficiency.


In conclusion, while having an energy-efficient HVAC system is beneficial, understanding and avoiding common misconceptions is vital for maximizing its effectiveness throughout different seasons. By considering factors such as proper insulation, accurate thermostat usage, regular maintenance checks, and strategic temperature management when away from home-homeowners can truly capitalize on their investment while maintaining comfort year-round.

The term "energy efficiency" often conjures up images of compromise, particularly in the realm of heating, ventilation, and air conditioning (HVAC) systems. A prevalent misconception is that energy-efficient HVAC systems inherently mean lower performance, suggesting that one must sacrifice comfort for sustainability. However, this belief could not be further from the truth.


At the heart of this misconception is a misunderstanding of what energy efficiency actually entails. Energy efficiency is about achieving the same level of performance using less energy. In other words, it's not about doing less; it's about doing more with less. Modern energy-efficient HVAC systems are designed to optimize energy consumption while maintaining or even enhancing performance standards.


Technological advancements have paved the way for innovative HVAC solutions that challenge outdated beliefs. For instance, variable speed technology allows compressors and fans to operate at different speeds depending on demand rather than running continuously at full power. This not only reduces energy consumption but also ensures consistent temperature control and improved humidity management. Additionally, smart thermostats can learn usage patterns and adjust settings automatically to maintain desired comfort levels without unnecessary energy expenditure.


Moreover, high-efficiency filters improve indoor air quality by trapping more pollutants without restricting airflow-a common concern with older systems perceived as being 'efficient.' These technological improvements ensure that modern HVAC systems deliver optimal climate control while minimizing environmental impact.


It's important to recognize that energy-efficient systems are rigorously tested to meet both performance and efficiency standards set by industry regulatory bodies like ENERGY STAR or LEED certification programs. These benchmarks provide assurance that an appliance isn't just labeled efficient but performs effectively under real-world conditions.


Education plays a crucial role in dispelling myths surrounding energy efficiency in HVAC systems. By understanding how these technologies work and their benefits beyond mere cost savings-such as increased comfort and health benefits-consumers can make informed decisions when upgrading or installing new systems.


In conclusion, the misconception that energy efficiency equates to lower performance is rooted in outdated notions lacking awareness of modern advancements in technology. As we continue to prioritize sustainability amid global environmental challenges, embracing efficient solutions doesn't mean compromising on comfort or effectiveness-it means harmonizing our living spaces with smarter technology for a better future.

Energy Efficiency Standards for Mobile Home HVAC Systems See New Updates

Energy Efficiency Standards for Mobile Home HVAC Systems See New Updates

As we venture into a future increasingly defined by sustainability and energy consciousness, the realm of mobile home energy efficiency is undergoing significant transformations.. These changes are not merely cosmetic but are rooted in evolving standards and technological advancements, particularly concerning HVAC systems.

Posted by on 2024-12-23

How SEER Ratings Impact Utility Costs for Mobile Home Owners

How SEER Ratings Impact Utility Costs for Mobile Home Owners

When discussing the cost implications for mobile home owners concerning SEER (Seasonal Energy Efficiency Ratio) ratings, real-world case studies and examples provide valuable insights into how these ratings can significantly impact utility costs.. SEER ratings, which measure the efficiency of air conditioning units, play a crucial role in determining energy consumption and subsequent expenses for mobile home residents who often face unique challenges due to the structure and insulation properties of their homes. Consider the example of Jane, a mobile home owner living in Florida, where air conditioning is essential throughout much of the year.

Posted by on 2024-12-23

Summer Strategies: Keeping Your HVAC Running Efficiently in Peak Heat

When we think about energy-efficient HVAC systems, the focus often lands on their advanced technology and eco-friendly design. However, a common misconception persists: that these systems don't require regular seasonal maintenance to maintain their efficiency. This belief can lead to decreased performance, higher energy costs, and a shorter lifespan for your HVAC system.


Energy-efficient HVAC systems are engineered to optimize performance while reducing environmental impact. They incorporate features like variable speed motors, smart thermostats, and heat recovery ventilation-all designed to maximize efficiency. Yet, similar to any other sophisticated machinery, these systems need regular maintenance to function at their best.


Neglecting seasonal maintenance can lead to several issues that directly affect the system's efficiency. For starters, filters can become clogged with dust and debris over time. A dirty filter restricts airflow, forcing the system to work harder than necessary to maintain the desired temperature. This not only increases energy consumption but also strains the components of the system, potentially leading to costly repairs or replacements.


Furthermore, without proper maintenance, components such as coils and fans can accumulate dirt and grime. This buildup reduces heat exchange efficiency and airflow within the system. Regular cleaning during seasonal check-ups ensures that these components remain unobstructed and fully operational.


Seasonal maintenance also provides an opportunity for HVAC technicians to inspect other crucial elements of the system such as refrigerant levels. Low refrigerant levels can result in inadequate cooling or heating and cause further damage if left unchecked. Technicians are trained to identify potential issues before they escalate into significant problems that could impair system efficiency.


Additionally, ensuring that all moving parts are well-lubricated helps prevent wear and tear from friction-a simple yet essential task often overlooked by those who assume energy-efficient systems require less attention.


Beyond maintaining optimal performance and preventing breakdowns, regular maintenance contributes significantly to extending the lifespan of an HVAC system. An efficiently running system experiences less stress on its components over time compared to one burdened by neglect-induced inefficiencies.


In conclusion, while energy-efficient HVAC systems offer numerous benefits through their innovative designs aimed at conserving resources and cutting costs in utility bills-they are not exempt from requiring routine care through seasonal maintenance checks conducted by professionals familiar with these advanced technologies' intricacies.. By investing in consistent upkeep throughout each season's changeover you ensure your home remains comfortable year-round while enjoying both long-term financial savings alongside reduced environmental impact-a win-win situation worth dispelling this prevalent misconception once-and-for-all!

Summer Strategies: Keeping Your HVAC Running Efficiently in Peak Heat

Fall Preparations: Transitioning from Cooling to Heating

In our quest for comfort and sustainability, homeowners often find themselves navigating the complex world of HVAC systems. As we become more conscious of energy consumption and its environmental impact, the allure of newer HVAC systems can be compelling. A common misconception is that simply purchasing a new HVAC system guarantees energy efficiency. However, this assumption can lead to disappointment if not carefully examined.


The belief that all newer HVAC systems are inherently energy efficient likely stems from the rapid advancements in technology and design improvements over recent years. Indeed, many modern systems boast features aimed at reducing energy use, such as variable-speed motors, smart thermostats, and improved insulation materials. These innovations do contribute to lower energy bills compared to older models that may lack these enhancements.


However, assuming that any new HVAC system will automatically be energy efficient overlooks several crucial factors. First and foremost is the importance of proper installation. An improperly installed system can negate even the most advanced features designed to save energy. For instance, ductwork that is poorly sealed or incorrectly sized can lead to significant air loss and inefficiencies. Therefore, hiring a qualified professional for installation is vital to ensure optimal performance.


Moreover, an HVAC system's efficiency is also heavily dependent on how well it matches the specific needs of your home. Factors like climate zone, home size, insulation quality, and usage patterns play critical roles in determining which system will operate most efficiently in a given environment. An oversized unit may cycle on and off too frequently, wasting energy and straining the equipment unnecessarily. Conversely, an undersized unit may struggle to maintain comfort levels during peak weather conditions.


Regular maintenance further influences an HVAC system's efficiency over time. Without routine inspections and upkeep-such as changing filters regularly or checking refrigerant levels-a high-efficiency model can quickly degrade into one that consumes excessive amounts of power just to keep up with demand.


Additionally, relying solely on a new HVAC system without addressing other aspects of home energy efficiency could result in missed opportunities for savings. Effective insulation, sealing leaks around windows and doors, using programmable thermostats wisely-all these measures complement an efficient HVAC system by reducing overall load requirements.


Finally, it's important to consider the long-term perspective when evaluating energy efficiency claims associated with newer systems. Some units might indeed deliver impressive short-term reductions in utility costs but come with substantial upfront expenses due to their sophisticated technology or specialized installation procedures.


In conclusion, while embracing modern HVAC technologies offers promising pathways towards increased efficiency and reduced environmental footprints-assuming all new systems are automatically efficient ignores key considerations essential for achieving those goals sustainably over time: correct sizing based on individual household characteristics; professional installation; ongoing maintenance; complementary home improvements; cost-benefit analysis regarding initial investment versus operational savings potential throughout its lifespan-all must converge thoughtfully together beyond mere novelty promises alone before ultimate satisfaction ensues genuinely realized expectations fulfilled accordingly thereby dispelling prevalent myths surrounding automatic efficiencies presumed therein otherwise perpetuated inadvertently misunderstood initially assumed falsely altogether unfortunately misleadingly misconceived commonly misjudged widely today prevalently still existing among many uninformed consumers alike everywhere globally likewise similarly understandably enough reasonably so indeed!

Winter Tips: Ensuring Optimal Performance During Cold Months

One common misconception that often circulates in discussions about energy-efficient heating, ventilation, and air conditioning (HVAC) systems is the belief that bigger units are inherently more efficient across all seasons. This assumption might appear logical at first glance, as larger units possess greater capacity and seemingly promise better performance. However, when it comes to HVAC systems, size does not equate to efficiency, and in fact, oversized units can lead to a host of inefficiencies and problems.


To understand why bigger isn't always better, it's important to consider how HVAC systems function. These systems are designed to maintain comfortable indoor temperatures by adjusting their output based on the specific needs of a space. An oversized unit will cool or heat a space more quickly than necessary, which may seem advantageous but actually results in frequent cycling on and off-this is known as short cycling. Short cycling not only causes unnecessary wear and tear on the system components but also leads to increased energy consumption. The unit expends significant amounts of energy each time it starts up, negating any potential efficiency gains from its size.


Moreover, larger HVAC systems tend to struggle with dehumidification during warmer months. Since these units cool spaces rapidly without running for extended periods, they do not operate long enough to effectively remove moisture from the air. As a result, occupants may experience discomfort due to high humidity levels despite lower temperatures-a counterproductive outcome for those seeking comfort and efficiency.


In colder seasons, an oversized heating system presents similar issues. Rapid warming can disrupt proper airflow distribution throughout a home or building. Uneven heating may create uncomfortable cold spots or hot zones that require constant thermostat adjustments-leading once again to inefficient energy use.


The ideal approach focuses on right-sizing an HVAC system for its intended environment based on accurate load calculations that consider factors like square footage, insulation quality, window types, occupancy patterns, and local climate conditions. Properly sized units run longer cycles at optimal capacities suited specifically for their designated spaces; thus enhancing both comfort levels and operational efficiency year-round.


Furthermore, advancements in technology have introduced variable-speed motors and smart thermostats capable of fine-tuning operations according to real-time demands rather than relying solely upon brute force capacity increases found within large models alone.


Ultimately debunking this myth involves recognizing that true efficiency hinges not just upon sheer size but also thoughtful design combined with precision installation practices tailored uniquely per situation encountered within diverse living environments encountered today worldwide-leaving behind outdated notions regarding "bigger equals better" far back into history's archives where they belong forevermore!

Year-Round Monitoring and Regular Inspections for Longevity

In the quest for energy efficiency, many homeowners have turned to smart thermostats as a simple solution, believing these devices alone can guarantee a significant reduction in energy consumption and costs. However, this belief is one of the most common misconceptions surrounding energy-efficient HVAC systems. While smart thermostats are indeed a valuable tool in optimizing home energy use, they are not a panacea for achieving maximum efficiency.


Smart thermostats offer advanced features such as learning user preferences, remote control via smartphone apps, and integration with other smart home devices. They can indeed lead to improved energy management by automatically adjusting heating and cooling schedules based on occupancy patterns and even weather forecasts. For many users, this translates into noticeable savings on their utility bills without sacrificing comfort.


However, relying solely on a smart thermostat overlooks several critical factors that contribute to overall HVAC efficiency. The performance of an HVAC system depends heavily on its installation quality, regular maintenance, and the condition of the home's insulation and ductwork. Even the smartest thermostat cannot compensate for leaky ducts or poor insulation that allows heat to escape during winter or enter during summer.


Moreover, the underlying HVAC equipment itself plays a crucial role in determining energy efficiency. If the furnace or air conditioner is outdated or improperly sized for the space it serves, no amount of smart technology will optimize its performance to an acceptable level. Investing in modern high-efficiency units is just as important as any technological upgrade like installing a smart thermostat.


Behavioral factors also play an influential role in realizing potential savings from smart thermostats. Users must be willing to engage with their device's capabilities-such as setting realistic temperature ranges and utilizing eco-modes-rather than expecting automatic adjustments alone to yield substantial benefits. Without conscious engagement from the user, even the most sophisticated thermostat may fail to deliver expected efficiency gains.


Ultimately, achieving true energy efficiency requires a holistic approach that considers all aspects of an HVAC system and its surrounding environment-not just reliance on advanced gadgets. Homeowners should focus on ensuring proper installation and regular maintenance while considering upgrades to both equipment and home insulation where necessary.


In conclusion, while smart thermostats represent an exciting leap forward in residential energy management technology, they should be viewed as one component within a broader strategy aimed at enhancing HVAC efficiency rather than a standalone solution guaranteeing results. By understanding this misconception and addressing other vital elements of their systems alongside adopting new technologies wisely-homeowners stand better chances at realizing meaningful improvements in both comfort levels and cost savings over time.

Mobile homes with detached single car garages

A mobile home (also known as a house trailer, park home, trailer, or trailer home) is a prefabricated structure, built in a factory on a permanently attached chassis before being transported to site (either by being towed or on a trailer). Used as permanent homes, or for holiday or temporary accommodation, they are often left permanently or semi-permanently in one place, but can be moved, and may be required to move from time to time for legal reasons.

Mobile homes share the same historic origins as travel trailers, but today the two are very different, with travel trailers being used primarily as temporary or vacation homes. Behind the cosmetic work fitted at installation to hide the base, mobile homes have strong trailer frames, axles, wheels, and tow-hitches.

History

[edit]

In the United States, this form of housing goes back to the early years of cars and motorized highway travel.[1] It was derived from the travel trailer (often referred to during the early years as "house trailers" or "trailer coaches"), a small unit with wheels attached permanently, often used for camping or extended travel. The original rationale for this type of housing was its mobility. Units were initially marketed primarily to people whose lifestyle required mobility. However, in the 1950s, the homes began to be marketed primarily as an inexpensive form of housing designed to be set up and left in a location for long periods of time or even permanently installed with a masonry foundation. Previously, units had been eight feet or fewer in width, but in 1956, the 10-foot (3.0 m) wide home ("ten-wide") was introduced, along with the new term "mobile home".[2]

The homes were given a rectangular shape, made from pre-painted aluminum panels, rather than the streamlined shape of travel trailers, which were usually painted after assembly. All of this helped increase the difference between these homes and home/travel trailers. The smaller, "eight-wide" units could be moved simply with a car, but the larger, wider units ("ten-wide", and, later, "twelve-wide") usually required the services of a professional trucking company, and, often, a special moving permit from a state highway department. During the late 1960s and early 1970s, the homes were made even longer and wider, making the mobility of the units more difficult. Nowadays, when a factory-built home is moved to a location, it is usually kept there permanently and the mobility of the units has considerably decreased. In some states, mobile homes have been taxed as personal property if the wheels remain attached, but as real estate if the wheels are removed. Removal of the tongue and axles may also be a requirement for real estate classification.

Manufactured home

[edit]
Example of a modern manufactured home in New Alexandria, Pennsylvania. 28 by 60 feet (8.5 m × 18.3 m)
Manufactured home foundation

Mobile homes built in the United States since June 1976, legally referred to as manufactured homes, are required to meet FHA certification requirements and come with attached metal certification tags. Mobile homes permanently installed on owned land are rarely mortgageable, whereas FHA code manufactured homes are mortgageable through VA, FHA, and Fannie Mae.

Many people who could not afford a traditional site-built home, or did not desire to commit to spending a large sum of money on housing, began to see factory-built homes as a viable alternative for long-term housing needs. The units were often marketed as an alternative to apartment rental. However, the tendency of the units of this era to depreciate rapidly in resale value[citation needed] made using them as collateral for loans much riskier than traditional home loans. Terms were usually limited to less than the thirty-year term typical of the general home-loan market, and interest rates were considerably higher.[citation needed] In that way, mobile home loans resembled motor vehicle loans more than traditional home mortgage loans.

Construction and sizes

[edit]
Exterior wall assemblies being set in place during manufacture

Mobile homes come in two major sizes, single-wides and double-wides. Single-wides are 18 feet (5.5 m) or less in width and 90 feet (27 m) or less in length and can be towed to their site as a single unit. Double-wides are 20 feet (6.1 m) or more wide and are 90 feet (27 m) in length or less and are towed to their site in two separate units, which are then joined. Triple-wides and even homes with four, five, or more units are also built but less frequently.

While site-built homes are rarely moved, single-wide owners often "trade" or sell their home to a dealer in the form of the reduction of the purchase of a new home. These "used" homes are either re-sold to new owners or to park owners who use them as inexpensive rental units. Single-wides are more likely to be traded than double-wides because removing them from the site is easier. In fact, only about 5% of all double-wides will ever be moved.[citation needed]

While an EF1 tornado might cause minor damage to a site-built home, it could do significant damage to a factory-built home, especially an older model or one that is not properly secured. Also, structural components (such as windows) are typically weaker than those in site-built homes.[3] 70 miles per hour (110 km/h) winds can destroy a mobile home in a matter of minutes. Many brands offer optional hurricane straps, which can be used to tie the home to anchors embedded in the ground.

Regulations

[edit]

United States

[edit]
Home struck by tornado

In the United States, mobile homes are regulated by the US Department of Housing and Urban Development (HUD), via the Federal National Manufactured Housing Construction and Safety Standards Act of 1974. This national regulation has allowed many manufacturers to distribute nationwide because they are immune to the jurisdiction of local building authorities.[4] [5]: 1  By contrast, producers of modular homes must abide by state and local building codes. There are, however, wind zones adopted by HUD that home builders must follow. For example, statewide, Florida is at least wind zone 2. South Florida is wind zone 3, the strongest wind zone. After Hurricane Andrew in 1992, new standards were adopted for home construction. The codes for building within these wind zones were significantly amended, which has greatly increased their durability. During the 2004 hurricanes in Florida, these standards were put to the test, with great success. Yet, older models continue to face the exposed risk to high winds because of the attachments applied such as carports, porch and screen room additions. Such areas are exposed to "wind capture" which apply extreme force to the underside of the integrated roof panel systems, ripping the fasteners through the roof pan causing a series of events which destroys the main roof system and the home.

The popularity of the factory-built homes caused complications the legal system was not prepared to handle. Originally, factory-built homes tended to be taxed as vehicles rather than real estate, which resulted in very low property tax rates for their inhabitants. That caused local governments to reclassify them for taxation purposes.

However, even with that change, rapid depreciation often resulted in the home occupants paying far less in property taxes than had been anticipated and budgeted. The ability to move many factory-built homes rapidly into a relatively small area resulted in strains to the infrastructure and governmental services of the affected areas, such as inadequate water pressure and sewage disposal, and highway congestion. That led jurisdictions to begin placing limitations on the size and density of developments.

Early homes, even those that were well-maintained, tended to depreciate over time, much like motor vehicles. That is in contrast to site-built homes which include the land they are built on and tend to appreciate in value. The arrival of mobile homes in an area tended to be regarded with alarm, in part because of the devaluation of the housing potentially spreading to preexisting structures.

This combination of factors has caused most jurisdictions to place zoning regulations on the areas in which factory-built homes are placed, and limitations on the number and density of homes permitted on any given site. Other restrictions, such as minimum size requirements, limitations on exterior colors and finishes, and foundation mandates have also been enacted. There are many jurisdictions that will not allow the placement of any additional factory-built homes. Others have strongly limited or forbidden all single-wide models, which tend to depreciate more rapidly than modern double-wide models.

Apart from all the practical issues described above, there is also the constant discussion about legal fixture and chattels and so the legal status of a trailer is or could be affected by its incorporation to the land or not. This sometimes involves such factors as whether or not the wheels have been removed.

North Carolina

[edit]

The North Carolina Board of Transportation allowed 14-foot-wide homes on the state's roads, but until January 1997, 16-foot-wide homes were not allowed. 41 states allowed 16-foot-wide homes, but they were not sold in North Carolina. Under a trial program approved January 10, 1997, the wider homes could be delivered on specific roads at certain times of day and travel 10 mph below the speed limit, with escort vehicles in front and behind.[6][7] Eventually, all homes had to leave the state on interstate highways.[8]

In December 1997, a study showed that the wider homes could be delivered safely, but some opponents still wanted the program to end.[9] On December 2, 1999, the NC Manufactured Housing Institute asked the state Board of Transportation to expand the program to allow deliveries of 16-foot-wide homes within North Carolina.[8] A month later, the board extended the pilot program by three months but did not vote to allow shipments within the state.[10] In June 2000, the board voted to allow 16-foot-side homes to be shipped to other states on more two-lane roads, and to allow shipments in the state east of US 220. A third escort was required, including a law enforcement officer on two-lane roads.[11]

New York

[edit]

In New York State, the Homes and Community Renewal agency tracks mobile home parks and provides regulations concerning them. For example, the agency requires park owners to provide residents with a $15,000 grant if residents are forced to move when the land is transferred to a new owner. Residents are also granted the right of first refusal for a sale of the park, however, if the owner does not evict tenants for five years, the land sale can go ahead. State law also restricts the annual increase in land lot fee to a cap of 3 percent, unless the landowner demonstrates hardship in a local court, and can then raise the land lot fee by up to 6 percent in a year.[12]

Mobile home parks

[edit]
Meadow Lanes Estates Mobile Home Park, Ames, Iowa, August 2010, during a flood

Mobile homes are often sited in land lease communities known as trailer parks (also 'trailer courts', 'mobile home parks', 'mobile home communities', 'manufactured home communities', 'factory-built home communities' etc.); these communities allow homeowners to rent space on which to place a home. In addition to providing space, the site often provides basic utilities such as water, sewer, electricity, or natural gas and other amenities such as mowing, garbage removal, community rooms, pools, and playgrounds.

There are over 38,000[13] trailer parks in the United States ranging in size from 5 to over 1,000 home sites. Although most parks appeal to meeting basic housing needs, some communities specialize towards certain segments of the market. One subset of mobile home parks, retirement communities, restrict residents to those age 55 and older. Another subset of mobile home parks, seasonal communities, are located in popular vacation destinations or are used as a location for summer homes. In New York State, as of 2019, there were 1,811 parks with 83,929 homes.[12]

Newer homes, particularly double-wides, tend to be built to much higher standards than their predecessors and meet the building codes applicable to most areas. That has led to a reduction in the rate of value depreciation of most used units.[14]

Additionally, modern homes tend to be built from materials similar to those used in site-built homes rather than inferior, lighter-weight materials. They are also more likely to physically resemble site-built homes. Often, the primary differentiation in appearance is that factory-built homes tend to have less of a roof slope so that they can be readily transported underneath bridges and overpasses.[citation needed]

The number of double-wide units sold exceeds the number of single-wides, which is due in part to the aforementioned zoning restrictions. Another reason for higher sales is the spaciousness of double-wide units, which are now comparable to site-built homes. Single-wide units are still popular primarily in rural areas, where there are fewer restrictions. They are frequently used as temporary housing in areas affected by natural disasters when restrictions are temporarily waived.[citation needed]

Another recent trend has been parks in which the owner of the mobile home owns the lot on which their unit is parked. Some of these communities simply provide land in a homogeneous neighborhood, but others are operated more like condominiums with club homes complete with swimming pools and meeting rooms which are shared by all of the residents, who are required to pay membership fees and dues.

By country

[edit]

Mobile home (or mobile-homes) are used in many European campgrounds to refer to fixed caravans, purpose-built cabins, and even large tents, which are rented by the week or even year-round as cheap accommodation, similar to the US concept of a trailer park. Like many other US loanwords, the term is not used widely in Britain.[citation needed]

United Kingdom

[edit]
A mobile home marketed as a holiday home

Mobile Homes or Static Caravans are popular across the United Kingdom. They are more commonly referred to as Park Homes or Leisure Lodges, depending on if they are marketed as a residential dwelling or as a second holiday home residence.

Residential Mobile homes (park homes) are built to the BS3632 standard. This standard is issued by the British Standards Institute. The institute is a UK body who produce a range of standards for businesses and products to ensure they are fit for purpose. The majority of residential parks in the UK have a minimum age limit for their residents, and are generally marketed as retirement or semi-retirement parks. Holiday Homes, static caravans or holiday lodges aren't required to be built to BS3632 standards, but many are built to the standard.

A static caravan park on the cliffs above Beer, Devon, England

In addition to mobile homes, static caravans are popular across the UK. Static caravans have wheels and a rudimentary chassis with no suspension or brakes and are therefore transported on the back of large flatbed lorries, the axle and wheels being used for movement to the final location when the static caravan is moved by tractor or 4×4. A static caravan normally stays on a single plot for many years and has many of the modern conveniences normally found in a home.

Mobile homes are designed and constructed to be transportable by road in one or two sections. Mobile homes are no larger than 20 m × 6.8 m (65 ft 7 in × 22 ft 4 in) with an internal maximum height of 3.05 m (10 ft 0 in). Legally, mobile homes can still be defined as "caravans".

Static holiday caravans generally have sleeping accommodation for 6 to 10 people in 2, 3 or 4 bedrooms and on convertible seating in the lounge referred to as a 'pull out bed'. They tend towards a fairly "open-plan" layout, and while some units are double glazed and centrally heated for year-round use, cheaper models without double glazing or central heating are available for mainly summer use. Static caravan holiday homes are intended for leisure use and are available in 10 and 12 ft (3.0 and 3.7 m) widths, a small number in 13 and 14 ft (4.0 and 4.3 m) widths, and a few 16 ft (4.9 m) wide, consisting of two 8 ft (2.4 m) wide units joined. Generally, holiday homes are clad in painted steel panels, but can be clad in PVC, timber or composite materials. Static caravans are sited on caravan parks where the park operator of the site leases a plot to the caravan owner. There are many holiday parks in the UK in which one's own static caravan can be owned. There are a few of these parks in areas that are prone to flooding and anyone considering buying a sited static caravan needs to take particular care in checking that their site is not liable to flooding.

Static caravans can be rented on an ad-hoc basis or purchased. Purchase prices range from £25,000 to £100,000. Once purchased, static caravans have various ongoing costs including insurance, site fees, local authority rates, utility charges, winterisation and depreciation. Depending on the type of caravan and the park these costs can range from £1,000 to £40,000 per year.[15] Some park owners used to have unfair conditions in their lease contracts but the Office of Fair Trading has produced a guidance document available for download called Unfair Terms in Holiday Caravan Agreements which aims to stop unfair practices.

Israel

[edit]
Posting of caravan in Mitzpe Hila, Israel, 1982

Many Israeli settlements and outposts are originally composed of caravans (Hebrew: קראוואן caravan; pl. קראוואנים, caravanim). They are constructed of light metal, are not insulated but can be outfitted with heating and air-conditioning units, water lines, recessed lighting, and floor tiling to function in a full-service capacity. Starting in 2005, prefabricated homes, named caravillas (Hebrew: קרווילה), a portmanteau of the words caravan, and villa, begin to replace mobile homes in many Israeli settlements.

Difference from modular homes

[edit]

Because of similarities in the manufacturing process, some companies build both types in their factories. Modular homes are transported on flatbed trucks rather than being towed, and lack axles and an automotive-type frame. However, some modular homes are towed behind a semi-truck or toter on a frame similar to that of a trailer. The home is usually in two pieces and is hauled by two separate trucks. Each frame has five or more axles, depending on the size of the home. Once the home has reached its location, the axles and the tongue of the frame are then removed, and the home is set on a concrete foundation by a large crane.

Both styles are commonly referred to as factory-built housing, but that term's technical use is restricted to a class of homes regulated by the Federal National Mfd. Housing Construction and Safety Standards Act of 1974.

Most zoning restrictions on the homes have been found to be inapplicable or only applicable to modular homes. That occurs often after considerable litigation on the topic by affected jurisdictions and by plaintiffs failing to ascertain the difference. Most modern modulars, once fully assembled, are indistinguishable from site-built homes. Their roofs are usually transported as separate units. Newer modulars also come with roofs that can be raised during the setting process with cranes. There are also modulars with 2 to 4 storeys.

[edit]

See also

[edit]
  • All Parks Alliance for Change
  • Campervan
  • Construction trailer
  • Houseboat
  • Manufactured housing
  • Modular home
  • Motorhome
  • Nomadic wagons
  • Recreational vehicle
  • Reefer container housing units
  • Small house movement
  • Trailer (vehicle)
  • Trailer Park Boys
  • Trailer trash
  • Vardo
  • Prefabricated home

References

[edit]
  1. ^ "Part 17, Mobile Home Parks". ny.gov.
  2. ^ "Mobile Manufactured Homes". ct.gov. Retrieved 28 March 2018.
  3. ^ "Caravan Repairs? Great Caravan Repair Deals!". canterburycaravans.com.au.
  4. ^ "Titles for Mobile Homes". AAA Digest of Motor Laws.
  5. ^ Andrews, Jeff (January 29, 2018). "HUD to explore deregulating manufactured housing". Curbed. Archived from the original on 2018-01-29. Retrieved 2019-04-19.
  6. ^ Hackett, Thomas (January 11, 1997). "Extra-wide homes to take to the road". News & Observer. p. A3.
  7. ^ Mitchell, Kirsten B. (January 10, 1997). "Wider trailer transport OK'd". Star-News. p. 1A.
  8. ^ a b Whitacre, Dianne (December 2, 1999). "Mobile-Home Makers Look to Squeeze on N.C. Roads". The Charlotte Observer. p. 1C.
  9. ^ "Study: Keep Curbs on Transporting Wide Mobile Homes". The Charlotte Observer. December 1, 1997. p. 4C.
  10. ^ Bonner, Lynn (January 7, 2000). "Program for wide mobile homes extended". News & Observer. p. A3.
  11. ^ "Wide mobile homes given final approval". News & Observer. June 3, 2000. p. A3.
  12. ^ a b Liberatore, Wendy (January 23, 2022). "Saratoga County's mobile home parks - a sign of an affordable housing crisis". www.timesunion.com. Retrieved January 23, 2022.
  13. ^ "Database of Mobile Home Parks in the United States". Retrieved 2009-02-17.
  14. ^ "Homes". Answers.com. Retrieved 2006-09-12.
  15. ^ "Cost of a static caravan or lodge". StaticCaravanExpert. 28 December 2020. Retrieved 2021-03-07.

Further reading

[edit]
  • Benson, J. E. (1990). Good neighbors: Ethnic relations in Garden City trailer courts. Urban Anthropology,19, 361–386.
  • Burch-Brown, C. (1996). Trailers. Charlottesville: University Press of Virginia. Text by David Rigsbee.
  • Geisler, C. C., & Mitsuda, H. (1987). Mobile-home growth, regulation, and discrimination in upstate New York. Rural Sociology, 52, 532–543.
  • Hart, J. F., Rhodes, M. J., & Morgan, J. T. (2002). The unknown world of the mobile home. Baltimore: Johns Hopkins University Press.
  • MacTavish, K. A., & Salamon, S. (2001). Mobile home park on the prairie: A new rural community form. Rural Sociology, 66, 487–506.
  • Moore, B. (2006). Trailer trash: The world of trailers and mobile homes in the Southwest. Laughlin: Route 66 Magazine.
  • Thornburg, D. A. (1991). Galloping bungalows: The rise and demise of the American house trailer. Hamden: Archon Books.
  • Wallis, A. D. (1991). Wheel estate: The rise and decline of mobile homes. New York: Oxford University Press.
[edit]
  • Regulating body in the UK
  • US Federal Manufactured Home Construction and Safety Standards

 

Photo
Photo
Photo
Photo

Driving Directions in Johnson County


Driving Directions From Extended Stay Lenexa Studios to Royal Supply Inc
Driving Directions From Tapco Products Co to Royal Supply Inc
Driving Directions From Security P S to Royal Supply Inc
Driving Directions From ECS Inc. International to Royal Supply Inc
Driving Directions From Ambitious Pixels to Royal Supply Inc
Driving Directions From Christmas Place to Royal Supply Inc
Driving Directions From Christmas Place to Royal Supply Inc
Driving Directions From Frontier Park to Royal Supply Inc
Driving Directions From National WWI Museum and Memorial to Royal Supply Inc
Driving Directions From Heritage Park to Royal Supply Inc
Driving Directions From Frontier Park to Royal Supply Inc

Reviews for Royal Supply Inc


Royal Supply Inc

J.

(1)

Terrible AC install. Skimped on 90°c fittings for the electric conduit under my house, they used black electrical tape instead, I look under my house to find bare wires that are not in a conduit which is an electrical safety no no and could lead to my house burning down. Left a massive gaping hole in my insulation leaving me to deal with itchy fiberglass myself which I only discovered after a summer of high electricity bills due to terrible insulation.

Royal Supply Inc

Caleb Roye

(5)

incredibly helpful staff. very educated on products and installation.

Royal Supply Inc

Donald Waggoner

(4)

I received a furnace installment from this place and was extremely happy with the furnace installation, but during the installation, they did something to completely make my hot water heater not work. They installed it on Friday at noon, and by the time I realized I had no hot water, it's after they closed, which left me with no hot water. Update: I had to call someone else out to help get my hot water heater fixed and operating correctly. While I am extremely grateful to the company for installing a great furnace, my final review will stay at 4 stars for the fact that the team did not address the hot water heater back to working order. I may use them for further things in the future, but I must leave this review to help others not have the same issues as me.

Royal Supply Inc

william mann

(5)

Needed an exterior door in a hurry after storm damaged mine. All the big box stores were days or weeks out on a 34x76 door. Google lead me here, I went in, asked if he had one that size, took me in their warehouse and showed me several options. Found a door I liked, and they had all the additional hardware to install I needed. One stop shop, friendly and helpful. Priced right too.

Royal Supply Inc

Ashley Foster

(5)

In a rush we had to replace our tub/surround in our home. We ordered online with another supplier and had a HORRIBLE experience. A friend recommended Royal Supply and they had exactly what we needed. We paid, loaded our trailer and were gone in less than 15 minutes. They are friendly and very helpful. Would definitely recommend to family and friends.

View GBP

Frequently Asked Questions

No, this is a misconception. Energy-efficient HVAC systems are designed to handle a wide range of temperatures and can perform effectively even during seasonal extremes if properly sized and maintained.
While the initial cost may be higher for some energy-efficient models, many options are competitively priced. Additionally, the long-term savings on energy bills often outweigh the initial investment over time.
This is not true. Programmable thermostats complement energy-efficient systems by optimizing temperature settings based on occupancy patterns, further enhancing efficiency and reducing costs throughout different seasons.
Lower utility bills depend on several factors beyond just installing an efficient system, such as proper installation, regular maintenance, home insulation quality, and usage habits across different seasons.
Yes, smaller spaces can significantly benefit from these systems. They help maintain consistent indoor climates efficiently throughout various seasons while also reducing overall energy consumption.